Tektronix 7D20 Operator's Manual page 227

GPIB-7D20
DISPLAY? REFERENCE
DISPLAY? RDOUT
DISPLAY?
Command/Query
DISPLAY RDOUT :
ON ~ OFF
COPY 1 : << ,fm #>
COPY 2 : <wfm #>
COPY 3 : <wfm #>
COPY 4 : <wfm #>
COPY 5 : <wfm #>
COPY 6 : <v fm #>
TABLE 4-7 (CONT}
7D20 Command Set
Description
Responds with the reference cursor waveform
status :
DISPLAY REFERENCE :<onoff>
Turns display text lines 1, 2, 15, and 16
on or off . DISP RDOUT may be selected
by means of the Utilities menu .
Responds with readout display status :
DISPLAY RDOUT :<onoff>
Responds with the waveform display
information :
DISPLAY CSW :<csw>,1 :<onoff>,2 :<onoff>,
3 :<onoff>,4 :<onoff>,5 :<onoff>,5 :<onoff>,
VECTOR :<onoff>,REFERENCE :<onoff>,
RDOUT :<onoff>
Copies waveform 1 to waveform <wfm #> .
Copies waveform 2 to waveform <wfm #> .
Copies waveform 3 to waveform <wfm #> .
Copies waveform 4 to waveform <wfm #> .
Copies waveform 5 to waveform <wfm #> .
Copies waveform 6 to waveform <wfm #> .
<onoff> : := ON ~ OFF
<wfm#> : :=1 ~2 ~3 ~4 ~5 ~6