Philips AZ5160 User Manual page 16

VIDEO CD
1. Press A-B on the remote control during playback to mark the start point of the chosen scene or
passage.
™ "REPEAT A" will appear on the screen.
2. Press A-B again to mark the end of the chosen scene or passage.
™ "REPEAT AB" will appear on the screen.
™ The selected scene or passage will start playing repeatedly.
3. Press A-B once more to return to normal playback.
™ "REPEAT AB" will disappear from the display.
Notes : - You can also cancel A-B repeat by pressing ∞ or §
- A-B repeat marking can cross from one track to another. But for VCD 2.0, you are only
able to set the A-B repeat marking within the same track.
Resume
• In stop mode, press Resume on the remote control to start playback again from where you have
stopped.
Note : - Resume will not be available if you have changed the disc, opened the disc tray or
disconnected the system from the power supply.
View
This feature allows you to scan through a VCD for a quick review.
1. In stop mode, press View on the remote control to go to disc view function.
™ On TV screen, up to 9 pictures will be displayed. If a menu consists of more than one page,
press ∞ or §
(or
™ The first several seconds of each track will be played.
To exit review mode, press digits 0 - 9 to play the desired track or 2; to play the current
selected track.
2. In playback mode, press View on the remote control to go to track view function.
™ press ∞ or §
(or
™ On TV screen, up to 9 pictures within the track will be displayed.
™ The first several seconds of each picture will be played.
To exit review mode, press digits 0 - 9 to play the desired position within the track, or 2; to
play the current selected position.
Note : - If the disc is AVCD disc and there're no video tracks on the same viewed page, it cannot
use the direct digital key to play the track.
Return
• Press Return on the remote control to return to the previous VCD disc MENU level. It is functional
only for Video CD when PBC is switched on.
Audio
You can use it to select the different audio modes.
• Press Audio on the remote control repeatedly to select the following modes:
➔ ➔
on the LCD represents channel left/channel right / dual channel on a bilingual
L L
R R
VCD or mono left / mono right / stereo on single language VCD.
16
¡ / ™
on the remote control)
¡ / ™
on the remote control)
CD/VCD/MP3-CD
¡ / ™
(or on the remote control)
to view the previous/next page.
to select the track.
.