General Operation; Controls; Radio - Philips Expanium AZ5150 User Manual

GENERAL OPERATION

1. To switch on the set, adjust the source selector.
– The POWER indicator lights up.
2. Adjust the sound using the VOLUME and DBB controls.
3 To switch off the radio, adjust the source selector to the
TAPE/ position, with the cassette keys released.
POWER OFF
– The POWER indicator goes out.
RADIO RECEPTION
1 Set the source selector to RADIO.
– The POWER indicator lights up.
2. Adjust the sound using the VOLUME controls and the DBB
switch.
3. Select the wave band using the BAND selector.
4. Tune to a radio station using the TUNING knob.
– For FM, pull out the telescopic aerial. To improve FM-reception,
incline and turn the aerial. Reduce its length if the FM-signal is
too strong (very close to a transmitter).
– For MW, the set is provided with a built-in aerial, so the
telescopic aerial is not needed. Direct the aerial by turning
the whole set.
5. To switch off, set the source selector to the TAPE/
position (with the cassette keys released).
– The POWER indicator goes out.
Environmental information
All unnecessary packaging material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packaging
materials, exhausted batteries and old equipment.
GENERAL OPERATION
POWER OFF
9