ICON iControls Manual page 14

TM
iMap iControls software panel
7
Assign the MIDI channels to the knob
5
Select your desired MIDI channel from 1-16 for the knob
Assign the CC number to the knob
6
Select your desired CC number from 0-127 in the pull-down menu for
the knob.
Select the 4 different Layers and choose the desired settings for
7
each layer
You may have 4 different "Layers" for different applications. Each
"Layer" can have its own control settings.
Assign the MIDI channels to the MMC buttons
8
Select your desired MIDI channel from 1-16 for the MMC buttons
Assign the CC number to the MMC buttons
9
Depending on your DAW or music software, assign a CC number to
these buttons according to your software.
(Note: We have created a series of templates for different software.
These are contained on the Utility CD. Simply import the correspondence
template file into your DAW and these buttons will function as MMC right
away.)
"Save file" button
10
Click this button to save your current settings for the iControls. The file is
an ".icon" file.
"Load file" button
11
Click this button to load a previously saved ".icon" setting file for
your iControls.
11
(1/3/5/8) (2/4/6/9)
(continues)
10 11 12 13