Dispensing Froth Directly Into The Cup / Cappuccino - Miele CVA 3660 Operating And Installation Instructions

Dispensing froth directly into the cup / Cappuccino

Steam release is controlled by a timer. If you do not get
sufficient froth in your cup and the steam jet has stopped
releasing steam, please shut off the steam valve. Press it
downwards again to reconnect it with the cappuccinatore.
^ Push the spout into the lid as far as it will go.
^ Turn the valve on the cappuccinatore clockwise as far as it
will go.
^ Fill the cappuccinatore a up to the upper marker with cold
milk and replace the lid.
^ Place the cappucinatore into the insert in the drip tray and
place a cappuccino cup underneath the coffee spout b.
^ Press the steam valve slowly downwards to connect it to
the cappuccinatore.
The steam valve must engage in the lower position in
order to connect properly with the cappuccinatore.
^ When you have enough froth in the cup push the steam
valve upwards again.
Making coffee
23