Drip Tray - Miele CVA 3660 Operating And Installation Instructions

Drip tray

^ Clean inside the waste container compartment, especially
at the top right and left hand sides near the small windows
(sensors). It is important to keep these sensors clean, as
otherwise the machine will not recognise the waste
container is present or that it requires emptying.
^ Push the waste container back into the machine as far as it
will go.
When you push the waste container into the machine, you
also push a lever backwards. This tells the machine that
the waste container has been put back. There will be a little
resistance as you do this. This is quite normal.
There is a sensor in the drip tray which causes a message to
appear in the display when the drip tray is full and needs to
be emptied. Remove the tray and empty and clean it when
this message appears.
However, to avoid a build-up of odours, the drip tray should
be cleaned every day.
After running the last rinse you should leave the drip tray
in position for a while before cleaning it so that you catch
any remaining water from the system. Take care when
removing the drip tray as the water can be very hot.
Danger of scalding.
Cleaning and care
55