Dispensing Froth Directly Into The Cup - Miele CVA 3660 Operating And Installation Instructions

Do not set the valve between these
two settings as this will cause the
milk to splutter.
Milk can be heated or frothed and
dispensed straight into a cup, or
heated or frothed in the cappuccinatore
jug first and then poured manually into
the cup. The spout must be pushed in
or pulled out:
– Milk spout pushed in: Milk will be
frothed and dispensed directly into
the cup
– Milk spout pulled out: Milk will be
frothed in the cappuccinatore jug
Heating the milk in the
cappuccinatore jug gives
you hotter milk.
Cold milk makes the best froth.
Do not use milk with additives.
Sugar additives would stick to the
milk pipework and damage the
coffee machine and the
cappucinatore.
Steam release is controlled by a
timer. If you do not get sufficient
froth in your cup and the steam jet
has stopped releasing steam,
please shut off the steam valve on
the machine. Press it downwards
again to reconnect it with the
cappuccinatore.

Dispensing froth directly into the cup

^ Push the spout into the lid as far as it
will go.
^ Turn the valve on the cappuccinatore
clockwise as far as it will go.
^ Fill the cappuccinatore a up to the
upper marker with cold milk and
replace the lid.
^ Place the cappucinatore into the
insert in the drip tray and place a
cappuccino cup underneath the
coffee spout b.
^ Press down the steam valve slowly
and carefully to connect it to the
cappuccinatore.
Making drinks
19