Introduction; Warning; What's In The Box - Celestron starsense autoalign User Manual

INTRODUCTION

StarSense™ is patented technology that allows your telescope to determine its position and
align itself with the night sky automatically . StarSense AutoAlign's internal camera captures an
image of the sky, and then analyzes it to identify the stars in the image . Based on this information,
StarSense can determine the coordinates of the center of the image . After repeating this
process a few times, the system can create an accurate model of the night sky . Once alignment
is complete, you can select any celestial object in the hand control's database, and StarSense
will automatically center the object in your eyepiece .

WARNING

• Never look directly at the Sun with the naked eye or with a telescope (unless you have the proper solar
filter) . Permanent and irreversible eye damage may result .
• Never use your telescope to project an image of the Sun onto any surface . Internal heat build-up can
damage the telescope and any accessories attached to it .
• Never use an eyepiece solar filter or a Herschel Wedge . Internal heat build-up inside the telescope can
cause these devices to crack or break, allowing unfiltered sunlight to pass through to the eye .
• Do not leave the telescope unsupervised, especially when adults are unfamiliar with your telescope
or children are present .

WHAT'S IN THE BOX

StarSense Camera
Large Camera Bracket
& Large Bracket Base
(pre-installed on camera in box)
StarSense Hand Control Small Camera Bracket 4mm Allen Camera to
Wrench Auxiliary
Port Cable
2 Thumbscrews
for Large Camera
Bracket
I 5