Table of Contents
Advertisement
Note: Use the hardware manufacturer's documentation
if you need help with connector pinouts or cabling.
2. Install or reconfigure VS-Link.
RS-232 Cabling
For information about building modem, null modem,
RJ45-to-DB25, and other custom RS-232 cables, see the
VS1000
Installation and Configuration Guide.
Use the following for pinout information on the RJ45
serial port connectors on the VS1000/VS1100.
RJ45 Connectors
Pin
RS-232 Signals
1
2
3
4
5
6
7
8
Windows NT Configuration
The following procedures apply to Window NT
installations only. For more information, see the
Installation and Configuration
Adding VS1100 Expansion Units
Follow these steps to add VS1100 expansion units to an
existing installation.
1. Switch off the VS1000 base unit.
2. Connect the VS1100 expansion unit to the VS1000
base unit, as described under Installing VS1100
Hardware.
RTS
DTR
GND
TxD
RxD
DCD
DSR
CTS
Pin 1
Pin 1
Guide.
Pin 8
Receptacle
Advertisement
Table of Contents
