Table of Contents
Advertisement
2. Optionally, mount the VS1100 port extenders into
the rack using the enclosed mounting brackets.
Warning: If mounting the VS1100 into a rack mount
unit, make sure the rack is not top heavy.
3. Connect the VS1100 device or devices to the VS1000
virtual server:
•
Connect the cable shipped with the VS1100 from
the connector labeled VS1100 on the VS1000
unit to the INPUT connector on the VS1100.
•
To connect additional VS1100 units, connect the
cable from the OUTPUT of one unit to the
INPUT of the next unit.
Note: You can connect up to three VS1100 port
extenders to one VS1000 base unit.
VS1000
VS1100
VS1100
VS1100
Terminator Plug
Note: The VS1100 cannot be connected directly to the
LAN. Remember, Ports 1 through 16 are RS-232
ports.
4. Install the terminator plug in the OUTPUT
connection of the last VS1100 in the installation.
5. Go to the Power-On Diagnostics discussion.
Advertisement
Table of Contents
