Specifications - Toro ProCore 648 Operator's Manual

Specifications

Engine
Tires
Controls
Electrical
Capacities
Brakes
Hydraulic System
Drive Train
Speed & Direction
Aerating Depth Control
Dimensions
Kohler, 2 cylinder, air cooled, gasoline engine.19 HP (14.2 kW) @ 3000 rpm.
Torque –32.5 lb–ft. @ 3000 rpm (44.1 N–m) 32.7 lb–ft max (44.3 N–m) @ 2400
rpm. High Idle–3400 rpm. Low Idle–1400 rpm. Displacement 41 cu–in. (674 cc). Air
Filter–Dry, large capacity, replaceable element. Oil Filter–External, spin–on.
Fan–High flow blower.
Front & Rear–20x10–10, 2 ply rated, smooth tread, tubeless, Inflated to 12 psi,
demountable rims.
Ignition, throttle, choke, parking brake, traction lever, raise/lower, aeration spacing,
manual/ground follow selector switch, system reset and aeration depth.
Alternator/Generator–12 Volt, 15 Amp regulated charging
Battery–BCI Group No.: U1, 300 Cold Cranking Amp @ 0_ F
Instrumentation–Hour/tachometer
Controller–Micro–processor logic control
Interlocks–Clutch Latch, traction neutral, coring head raise/lower
Fuel 7.5 gal (28.4 L) Minimum (unleaded gasoline)
Engine Oil w/ Filter 2 Qt. (1.9 L) (Mobil 10W–30)
Hydraulic Oil 3.0 gal (11.3 L)
Service Brake Dynamic through hydrostatic transmission
Parking Brake Hand actuated on handle
Remote Spin–On Filter.
3 wheel drive, Parallel–Series hydrostatic, closed loop
Pump Variable displacement piston type
.97 cu–in (16 cc) full stroke
12 gpm (45.4 lpm) full stroke
2900 psi (200 bar) system relief
Wheel Drive High torque, low speed wheel motors
Rear 12 cu–in (197 cc) displacement
Front 24 cu–in (393 cc) displacement
Hand controlled bail on handle
Operator Presence–Coring head lifts and de–clutches if released
Forward 0–3.5 mph (0–5.6 km/h), variable, 4 aeration speeds
Reverse 0–2.0 mph (0–3.2 km/h), variable
Aerating
Detent 1 1.5" (3.8 cm) spacing
Detent 2 2.0" (5.1 cm) spacing
Detent 3 2.5" (6.4 cm) spacing
Detent 4 3.0" (7.6 cm) spacing
True Core Micro–processor logic control of lift & lower via hydraulic
solenoid/cylinder
Fixed Mechanical stops, operator adjusted for desired depth
Overall Length 104.5 in. (265.4 cm)
Overall Width 50.12 in. (127.3 cm)
Height
Head Raised 45.0 in. (114.3 cm)
Head Lowered 36.5 in. (92.7 cm)
Top of Handle 41.0 in. (104.1 cm)
Wheel Base 44.5 in. (113.0 cm)
Track Width 38.3 in. (97.3 cm)
Coring Width 48 in. (122 cm)
Ground Clearance 4.75 in. (12.1 cm)
Weight (less fuel) 1590 lbs (721 Kg)
9