Performance Assistant; Guitar Mode - thomann SP 5600 User Manual

8.20

Performance Assistant

8.20.1

GUITAR mode

Chord area A
Area B1
Area B2
Rhythm area C
4. The default parameters stored in O.T.S. are:
Track on / off
n
Change voice R1, R2, L
n
Volume R1, R2, L
n
Chorus level voice R1, R2, L
n
n Reverb level voice R1, R2, L
The 'Performance Assistant' is a playing aid, which allows you to simulate different
instruments on the claviature.
1.
Press [PERFORM] to activate the playing aid.
GUITAR mode is enabled by default. Use the buttons [YES] and [NO] or the jog
dial to select a voice.
2.
Adjust the Tempo using the [TEMPO] buttons.
3.
Adjust the time signature with the [YES] and [NO] buttons.
In this mode, you can simulate a guitar sound on the claviature. The table shows the
various play areas.
This area includes the keys A0 to B3 of the claviature.
The chord type appears in the display. The root of the guitar chord sounds.
This area includes the white keys C4 to B4 of the claviature.
Once the chord type is displayed, you can play several figures of broken chords with
the white keys in this area. While playing, you also have the possibility to vary the
chord played in the chord area.
This area includes the white keys C5 to A6 of the claviature.
Once the chord type is displayed, you can play a solo track with the white keys in this
area. While playing, you also have the possibility to vary the chord played in the
chord area.
This area includes the white keys C6 to G6 of the claviature.
SP 5600
Operating
41