Equalizer; Reverb Effect; Reverb Volume - thomann SP 5600 User Manual

Turning the keyboard on / off, setup

7.7.6 Equalizer

7.7.7 Reverb effect

7.7.8 Reverb volume

24
With this function you can pre-select a certain tone colour.
1.
Use [FUNCTION] or [FUNCTION]
current setting appears on the display.
2.
Use the buttons [YES/+] or [NO/–] or the jog dial to select the desired function:
n 'Pop'
'Rock'
n
'Class'
n
'Jazz'
n
'Dance'
n
'Reset'
n
3.
Press [YES/+] and [NO/–] simultaneously to load the standard value 'Reset' (EQ
off).
With this function you can turn on the Reverb effect and select the effect type.
1.
Use [FUNCTION] or [FUNCTION]
current setting appears on the display.
2.
Use the buttons [YES/+] or [NO/–] or the jog dial to assign the desired function:
'Room1'
n
'Room2'
n
'Room3'
n
'Hall1'
n
'Hall2'
n
'Hall3'
n
'Chr1'
n
'Chr2'
n
'Del'
n
n 'PanD'
3.
Press [YES/+] and [NO/–] simultaneously to load the standard value 'Hall1' .
With this function you can set the Reverb effects volume in a range from 0 to 127.
1.
Use [FUNCTION] or [FUNCTION]
rent setting appears on the display.
2. Adjust the effects ratio with the buttons [YES/+] and [NO/–] or with the jog dial.
3. Press [YES/+] and [NO/–]simultaneously to reset the effects ratio to the
standard value (depending on the selected voice).
portable grand keyboard
to change into the [EQ TYPE] menu. The
to change into the 'Rev TYPE' menu. The
to change into the 'RevLev' menu. The cur‐