Auto Accompaniment - thomann SP 5600 User Manual

8.16

Auto Accompaniment

Auto accompaniment functions
Playing with auto accompaniment
The accompaniment function is controlled via four parameters: INTRO, MAIN (A, B),
FILL (A, B) and ENDING.
1. INTRO
To insert an intro, press the [INTRO/ENDING] button before beginning to play.
Depending on the selected Style the rhythm starts with two to four bars, fol‐
lowed by the main part.
2. MAIN (A, B)
The main part consists of an accompaniment pattern with different sections
and is repeated until you enter a new song section (FILL or ENDING). The indi‐
vidual sections of the main part are selected via the buttons [A] and [B].
3. FILL (A, B)
Use the buttons [A] and [B] to insert two different fill measures. Each fill
measure will be repeated until you release the button.
4. ENDING
If you press the [INTRO/ENDING] button while Auto Accompaniment is acti‐
vated, an ending part suitable for the Accompaniment is started, finishing the
song.
1.
Select the desired style (
2. Use [CHORD MODE] to enable chord recognition.
3. Use [SYNC START] to enable Sync Start operation.
4. Press the [INTRO/ENDING] button to start the song with an Intro.
ð The character 'A' is flashing on the display.
5.
The accompaniment starts as soon as you press a key in the chord area.
6. If desired, you can use [FILL B] to insert fill measures as transition into main part
B.
ð The character 'B' is flashing on the display.
7. Press the [INTRO/ENDING] button again to conclude the song with an Ending.
SP 5600
Ä Chapter 8.4 'Style playing' on page 28).
Operating
39