Fine Tuning; Time Signature; Split Point - thomann SP 5600 User Manual

7.7.1 Fine tuning

7.7.2 Time signature

7.7.3 Split point

With this function you can fine tune the entire claviature in cent steps.
1.
Use [FUNCTION] or [FUNCTION]
rent setting appears on the display.
2.
Adjust the pitch using the buttons [YES/+] or [NO/–] or the jog dial in a range
from –50 to +50 cents. Each time a key is pressed, the value changes by 1 cent.
3. Press [YES/+] and [NO/–] simultaneously to restore the default pitch.
With this function you can set the time signature in a range from 0 to 9.
1.
Use [FUNCTION] or [FUNCTION]
rent setting appears on the display.
2.
Adjust the time signature with the buttons [YES/+] and [NO/–] or with the jog
dial.
3.
Press [YES/+] and [NO/–] simultaneously to restore the time signature standard
value '004' .
Using this function you can select a point to split the whole claviature into two areas.
1.
Use [FUNCTION] or [FUNCTION]
play shows the current setting.
2.
Specify the desired split point using the buttons [YES/+] or [NO/–] or the jog
dial. The keys to the right of this point are the right hand area, the keys of the
other sides are the left hand area (chord area).
3.
Press [YES/+] and [NO/–] simultaneously to restore the split point standard
value 'F#3' .
In TWINOVA mode, the default split point is E3 (32) and can only be deter‐
mined by the user between C3 and C6 (28 to 64).
SP 5600
Turning the keyboard on / off, setup
to change into the 'Tune' menu. The cur‐
to change into the 'Beat' menu. The cur‐
to change into the 'Split Pt' menu. The dis‐
21