JBL LSR4328P Owner's Manual page 18

~
e
Reference - Front Panel
S/PDIF input selected (channel A)
~
e
S/PDIF input selected (channel B)
e
~
AES/EBU input selected (channel A)
e
~
AES/EBU in put selected (channel B)
After changing the inp ut source, the Active Input
di
play on th rear panel will
indicate the current selection.
l I III
When monitoring digital (S/PDIF or AES/EBU) signal , the rear panel DIP switches
must be set correctly in order to determine which cha nnel is being reproduced. For more
information , see page 23 in this manual.
lIIII
If you select a digital input to which no signal is connected, no signal will be heard, and
the left-most meter segment will flash to indicate an error condition .
15