Important Safeguards - Goodmans MICRO1104HDAB Instruction Manual

Dab micro system
Table of Contents

Advertisement

IMPORTANT SAFEGUARDS

For your convenience a mains plug has been fitted to this appliance. For your safety please observe the
following information.
1. Should the fuse in the plug fail remove the plug from the wall socket and replace the fuse with a 3 Amp
ASTA approved to BS 1362 fuse.
2. Never use the plug without the fuse cover fitted. Replacement fuse covers are available from your dealer or
most electrical retail outlets.
3. If the mains plug is cut off the cable, rewire the replacement plug in accordance with instruction give in this
manual.
4. CAUTION: Under no circumstances should the discarded plug be inserted into the mains socket. To pre-
vent a shock hazard carefully dispose of the discarded plug. Do not leave the plug lying around
where children might see it.
WARNING: To prevent fire or shock hazard do not expose this unit to rain or moisture.
CAUTION: DANGEROUS VOLTAGES EXIST INSIDE THIS UNIT. DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. DISCONNECT FROM MAINS SUPPLY WHEN NOT IN USE.
BLUE
POWER
CORD
WARNING: UNDER NO CIRCUMSTANCES MUST THE LIVE OR NEUTRAL WIRES BE CONNECTED TO THE
EARTH TERMINAL IN A 3- PIN MAINS PLUG.
This symbol means that this unit is double insulated.
An earth connection is not required.
PRE FITTED MAINS PLUGS
These wires in this mains lead are coloured in
accordance with the following wiring codes:
FUSE
Blue..........................................................Neutral
Brown..................................................... ......Live
BROWN
These wires in this mains lead must be connected to
the terminals in the plug as follows:
Blue Wire............................................N or Black
Brown Wire..........................................L or Red
CORD
Only a 3 Amp fuse should be fitted in the plug or a 5
GRIP
Amp fuse at the distribution board.
- 2 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents