Additional Functions - IKEA VALFRI Instruction Manual

ENGLISH
Using the core temperature sensor
The core temperature sensor measures the
core temperature of the meat.
There are two temperatures to be set:
• The oven temperature.
• The core temperature.
Caution! Only use the core
temperature sensor supplied with
the appliance, or genuine
replacement parts.
1. Put the plug of the core temperature
sensor into the socket on the side of the
main oven.
2. Put the point of the core temperature
sensor into the centre of the meat.
3. Press again and again until the
indicator for the core temperature
sensor flashes.
4. Press the button
temperature.

Additional functions

Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
or to set the core
You can set the temperature from 30 °C
to 99 °C. Refer to values in the table.
Recommended core temperatures
50 °C
60 °C
70 °C
5. Set the oven function and the oven
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds for
two minutes. Press a button to stop the
signal.
6. Deactivate the appliance.
7. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the appliance.
If the meat is not cooked to your
satisfaction, do the above steps again and
set a higher core temperature.
You can change the temperature at any
time during the cooking. Press
the set core temperature.
Warning! Be careful when you
remove the tip and plug of the
core temperature sensor. The
core temperature sensor is hot.
There is a risk of burns.
Safety thermostat
Incorrect operation of the appliance or
defective components can cause dangerous
overheating. To prevent this, the oven has a
safety thermostat which interrupts the
power supply. The oven activates again
automatically when the temperature drops.
14
Rare
Medium
Well done
to change