Cylinder/Piston Assy - Carburettor; Crankshaft - PIAGGIO Ape Workshop Manual

Engine
Specific tooling
T.0030632 Wrench for helical gear nut
T.0027338 Punch to fit sealing rings

Cylinder/piston assy - carburettor

BIG END - CYLINDER - REMOVAL
After removing the cooling cover, the fan cover and the silencer, unscrew the four fixing nuts and remove
the big end and the cylinder.
PISTON PIN - REMOVAL
With the help of specific pliers, remove the circlips
(1) and expel the pin with a punch of Ø 16 mm.
Specific tooling
T.0017104 Pliers for circlips

Crankshaft

Crankshaft
Position the special tool (1), using the appropriate
screws, then act on the central screw (2) until com-
pletely loosening the crankshaft from its housing.
Specific tooling
19.1.20024 Crankshaft removal tool
BENCH ROLLER BEARING INTERNAL RING
Apply the specific extractor (1) equipped with the
specific reduction rings of component 27, and act
on the handle (2) until extracting the bearing track.
Lubrification
"L.S." DEVICE
EN - 84
APE TM Benzina