Wheel Hub From Triangle - Removal; Seal Ring And Roller Bearing - Removal; Wheel Axle - Removal - PIAGGIO Ape Workshop Manual

APE TM Benzina
Suspensions

WHEEL HUB FROM TRIANGLE - REMOVAL

Release the parking brake cable; remove the
brake oil suction pipe (1), the three anchor bolts
(2) and remove the entire hub.
BALL BEARING - REMOVAL
In a similar manner as per the brake drum, place
the hub on the supporting base and expel the ball
bearing (1) using a section of tube, OD 32 mm.
SEAL RING AND ROLLER BEARING - REMOV-
AL
With the tip of a screwdriver, remove the sealing
ring (1) fit the specific tool (2) fitted with compo-
nents 1-7-11 and act on the central nut (3) until the
bearing is finally removed.

WHEEL AXLE - REMOVAL

Loosen the hub lock nut (1) (previously loosened
in the operations described in the section "Hub
lock nut"). Remove the washer (3), the cone (4),
the hub (5) and, by means of mallet blows, eject
the wheel axle (2).
SS - 127