Front Wheel Brake Drum; Bottom Seat Of The Steering Bottom Bearing - Fitting - PIAGGIO Ape Workshop Manual

Steering column

FRONT WHEEL BRAKE DRUM

With the tip of a screwdriver remove the dust gaiter; unscrew the lock nut with collar on the wheel axis
and, using a mallet, remove the brake drum from its axis.
CAUTION
WHEN THE BRAKE DRUM IS REASSEMBLED, THE NUT WITH COLLAR THAT HAD BEEN
PULLED OUT DURING REMOVAL MUST NOT BE USED AGAIN BUT REPLACED WITH A NEW
ONE.

BOTTOM SEAT OF THE STEERING BOTTOM BEARING - FITTING

On the steering tube fit the dust gaiter (1) and seat (2) then, using the special tool (1) push (using a
mallet) until the seat-dust gaiter unit stops; at this point remove the tool and mount the balls (n. 27) on
the seat which had been previously greased with the specific product.
Recommended products
AGIP GREASE PV 2 Multipurpose grease
NLGI 2 specifications; ISO-LXBIB2
SC - 112
APE TM Benzina