The Two Wedge Washers - Removal; Pin And Roller Bushings - Removal - PIAGGIO Ape Workshop Manual

Suspensions

THE TWO WEDGE WASHERS - REMOVAL

(Manual operation that does not require the use of
the press).
- With the help of a punch (1) with diameter 14,
flatten with a mallet the wedge washer and pull it
out with a pointed screwdriver.
For the second washer, repeat the operation using
the punch on the side opposite the one shown in
the figure.

PIN AND ROLLER BUSHINGS - REMOVAL

- On the specific tool (1), fitted with components 1-6-18 and 21, place the suspension assembly as
shown in the figure and operate with the press until the pin and the roller bushing are simultaneously
expelled in the direction opposite to the press thrusting force.
When the pin and the first roller bushing are expelled, the swinging arm is completely disanchored from
the steering tube.
WARNING
THE SPECIAL TOOL MUST ALWAYS BE PROVIDED WITH ACCESSORIES 1 (ON THE TOP SIDE)
AND 18 (ON THE BOTTOM CRANKCASE).
Specific tooling
19.1.20000 Tool for front suspension overhaul
SS - 120
APE TM Benzina