Advertisement
4
B E F O R E
Make sure that the following
parts are available before you
start setting up the BeoSound
Ouverture:
• one set of glass doors (left
and right).
• one cable cover, for
concealing and holding the
cables on the rear of the
BeoSound Ouverture.
• one lead for connection to
the mains.
• a pair of active Bang &
Olufsen speakers with
connectors.
When you set up your system,
we suggest you use the fol-
lowing sequence:
Complete the setting-up
procedure as described in the
section Ready for use... and
make your presettings of sound
levels, favourite radio stations,
etc. as described in the Beo-
Sound Ouverture User's guide.
Y O U
S T A R T ...
1 Place the BeoSound
Ouverture where you
want to use it.
2 Set up your speakers and any
auxiliary equipment.
3 Connect all cables to their
sockets on the rear panel of
the BeoSound Ouverture
(only, remember not to
connect the system to the
mains yet!).
4 Arrange the cables in the
cable cover grooves, and
attach the cover to the rear
of the BeoSound Ouverture.
5 Attach the glass doors.
6 Connect the system to the
mains.
Advertisement
