LG 882LE Service Manual page 7

On Screen Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the
On Screen Display Control system. A quick example is given below to familiarize you with the use of the controls.
Following section is an outline of the available adjustments and selections you can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before making image adjustment.
To make adjustments in the On Screen Display, follow these steps:
OSD
/
OSD SOURCE SET
You were introduced to the procedure of selection and adjusting an item using the OSD system.
Listed below are the icons, icon names, and icon descriptions of the items that are shown on the Menu.
OSD Adjust
BRIGHTNESS / CONTRAST
COLOR
PRESET
RED
GREEN
BLUE
/
SOURCE SET
100
100
9300K 6500K
1. Press the OSD Button, then the main menu of the
OSD appears.
2. To access a control, use the
icon you want becomes highlighted, press the
SOURCE/SET Button.
3. Use the Buttons to adjust the item to the
desired level.
4. Accept the changes by pressing the SOURCE/SET
Button.
5. Exit the OSD by Pressing the OSD Button.
Description
Brightness
Used to adjust the brightness of the screen.
Contrast
Adjust the display to the contrast desired.
PRESET 9300K/ 6500K
To appear the displays color temperature.
• 9300K:Slightly bluish white.
• 6500K:Slightly reddish white.
To set your own color levels.
RED
GREEN To set your own color levels.
BLUE To set your own color levels.
- 7 -
Buttons. When the