Related Manuals for LG 84WS70MS
Summary of Contents for LG 84WS70MS
- Page 1 OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 84WS70MS www.lg.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS CONTENTS - PICTURE settings LICENSES Using the additional options - Adjusting aspect ratio ASSEMBLING AND - SOUND settings PREPARING - TIME settings - OPTION settings Accessories - NETWORK settings Optional Accessories - SUPPORT settings Parts and buttons Portrait Layout MAKING CONNECTIONS Using the Mounting Cable Tie Connecting the Eye-Bolt Bracket Connecting to a HD receiver, DVD, Connecting the Media Player Camcorder, Camera, Gaming Device or Connecting an Optional Box VCR player Mounting on a wall - HDMI connection - AV(CVBS) connection REMOTE CONTROL Connecting to a USB Connecting to the LAN... -
Page 3: Licenses
LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video- on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. -
Page 4: Assembling And Preparing
ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. POWER ENERGY INPUT MONITOR SAVING . , ! PQRS WXYZ 1/a/A CLEAR - * # MARK BRIGHT NESS MUTE Power Cord D-sub 15 pin signal cable AUTO S.MENU MENU BACK TILE EXIT Remote control and... -
Page 5: Optional Accessories
ASSEMBLING AND PREPARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Media Player Screw CD(Owner's Manual)/ Card Media Player Kit Optional Box Screw Optional Box Kit NOTE Optional accessories are not included for all models. The Optional Box Port may be used for future devices. It is currently not supported. -
Page 6: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons IR Receiver/ Screen Buttons/ Power Indicator Screen Marks y Lighting On: Turned on y Lighting Off: Turned off Connection panel NOTE You can set the Power indicator to on or off by selecting OPTION in the main menu. - Page 7 ASSEMBLING AND PREPARING Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Moves the selection up and down. Adjusts the volume level. AUTO/SET Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) Turns the power on or off. / I IR Receiver This is where the unit receives signals from the remote control. Power Indicator This Indicator lights up red when the display operates normally(on mode). If the display In sleep mode (In Power Saving mode), this indicator color changes to amber.
-
Page 8: Portrait Layout
ASSEMBLING AND PREPARING Portrait Layout Using the Mounting Cable When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the Insert the two cable ties into the bottom hole on the screen). back of the set as shown in the figure to organize cables. -
Page 9: Connecting The Eye-Bolt Bracket
ASSEMBLING AND PREPARING Connecting the Eye-Bolt Bracket The Eye-bolt bracket is designed to be used to lift the set up. Attach the bracket to the product using the two screws provided. Installing in Landscape Position Installing in Portrait Position... -
Page 10: Connecting The Media Player
ASSEMBLING AND PREPARING Connecting the Media Attach the Media Player using the four provided screws. Player Place a soft cloth on the table and put the set with the screen facing downward. Remove the handle at the bottom of the section where the Media Player is mounted on the set. NOTE To mount the Media Player, push it into the special compartment located on the back of the Use the screws provided with the product monitor. (diameter 3.0 mm x pitch 0.5 mm x length 6.0 mm). -
Page 11: Connecting An Optional Box
ASSEMBLING AND PREPARING Connecting an Optional Box Place a soft cloth on the table and put the set with the screen facing downward. To mount the box, push it into the special compartment located on the back of the monitor. Attach the box using the two provided screws. -
Page 12: Mounting On A Wall
ASSEMBLING AND PREPARING Mounting on a wall CAUTION Disconnect the power before installing or For proper ventilation, allow a clearance of 10 moving the monitor. Otherwise electric shock cm on each side and from the wall. Detailed may occur. installation instructions are available from your If you install the Monitor on a ceiling or dealer, see the optional Tilt Wall Mounting Bracket slanted wall, it may fall and result in severe Installation and Setup Guide. injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. D o not over tighten the screws as this may cause damage to the Monitor and void your warranty. 10 cm U se screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are 10 cm not covered by the warranty. 10 cm 10 cm 10 cm NOTE Use screws that are listed on the VESA standard screw specifications. If you intend to mount the Monitor to a wall, attach a Wall mounting interface (optional parts) to the The wall mount kit includes an installation back of the set. -
Page 13: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control at the remote control sensor on the Monitor. / I (POWER) ENERGY SAVING Turns the Monitor on or off. Adjusts the brightness of the screen to reduce energy consumption. POWER MONITOR ON / OFF Turn off the monitor and then INPUT turn it back on. Selects the input mode. ENERGY INPUT MONITOR SAVING 1/a/A Button Number and Alphabet buttons Toggles between numerical . - Page 14 REMOTE CONTROL POWER ENERGY INPUT MONITOR SAVING . , ! MENU PQRS WXYZ Accesses or exits the menus. 1/a/A CLEAR - * # AUTO MARK Automatically adjusts picture position and minimizes image instability.(RGB input only) Navigation buttons BRIGHT NESS Scrolls through menus or options. MUTE AUTO S.MENU MENU S.MENU (SuperSign Menu Key) Selects menus or options and Selects the SuperSign OSD confirms your input. Menu.(SuperSign input only) BACK EXIT Allows the user to move back...
-
Page 15: Change Device Name
USING THE MONITOR SimpLink Setting Change Device Name SimpLink allows you to control various multimedia You can edit the name of the external device con- devices to enjoy the multimedia simply by using nected to the input port to display which device is the remote control through the SimpLink menu. connected to the port. Press INPUT to access Input List. Press INPUT to access Input List. POWER POWER ENERGY INPUT ENERGY INPUT MONITOR MONITOR SAVING SAVING . , ! . , ! AUTO S.MENU AUTO S.MENU MENU MENU PQRS WXYZ PQRS... -
Page 16: Using The Monitor
USING THE MONITOR USING THE MONITOR Connecting to a PC CAUTION Your Monitor supports the Plug & Play* feature. Connect the signal input cable * Plug & Play: This is the function that allows a PC and tighten it by to use the monitor without installing a driver. turning the screws clockwise. Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible. NOTE It is recommended you use an HDMI connection for the best image quality. Use a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI cable, with a ferrite core to maintain standard compliance for the product. If you turn the Monitor on when the set is cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear on the screen. This is normal. For some graphic cards, the screen may not display properly when you use dual monitors. -
Page 17: Rgb Connection
USING THE MONITOR RGB connection DVI-D connection Transmits an analog video signal from your PC to Transmits a digital video signal from your PC to the Monitor. Connect the PC and the Monitor the Monitor. Connect the PC and the Monitor set with the 15 pin signal cable as shown in the with a DVI cable as shown the following following illustrations. illustrations. Select RGB input source on the monitor. Select DVI-D input source on the monitor. Back of the product. Back of the product. (not included) (not included) (not included) PC/ MAC Macintosh Adapter (not included) NOTE Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) Apple computers may require an adapter to connect to this monitor. Call or visit their web site for more information. -
Page 18: Hdmi Connection
USING THE MONITOR HDMI connection Display Port connection Transmits the digital video and audio signals Transmits the digital video and audio signals from from your PC to the Monitor. Connect the PC and your PC to the Monitor. Connect the PC and the the Monitor with an HDMI cable as shown in the Monitor with a Display Port cable as shown in the following illustration. following illustrations. Select HDMI input source. Select Display Port input source. Back of the product. (not included) (not included) (not included) NOTE Use a High Speed HDMI™ Cable. Please check the PC environment if you cannot hear audio in HDMI mode. Some PCs require you to manually change the default audio output to HDMI. If you want to use HDMI PC mode, you must set PC/DTV to PC mode. When HDMI PC is used, a compatiblity problem might occur. -
Page 19: Using The Input List
USING THE MONITOR Using the Input List Press INPUT to access the INPUT LIST. POWER ENERGY INPUT MONITOR SAVING . , ! PQRS WXYZ 1/a/A CLEAR Press the Navigation buttons to scroll to one of the input sources and press OK. - * # Input source Description Watch video from a VCR or other external devices. View a PC display on the screen. HDMI1 Watch contents in a PC, DVD of Digital set-top box other high definition devices. HDMI2 Watch contents in a PC, DVD of Digital set-top box other high definition devices. Display Port Watch contents in a PC, DVD of Digital set-top box other high definition devices. DVI-D View a PC display on the screen. SuperSign Views the Media Player display on the screen. -
Page 20: Entertainment
ENTERTAINMENT ENTERTAINMENT Connecting to a wired network Follow the steps below to set up the network set- tings. (Even if your display is already connected automatically, running setup again will not harm (Depending on model) anything.) Press MENU to access the main menus. Connect the display to a local area network (LAN) via the LAN port as shown in the following illustra- Press the Navigation buttons to scroll to NET- tion and set up the network settings. WORK and press OK. This monitor only supports a wired network con- Press the Navigation buttons to scroll to Net- nection. work Connection and press OK. After making a physical connection, a small number of home networks may require the display Select Set Expert. network settings to be adjusted. For most home Select Manual Mode or Auto Input. networks, the display will connect to automatically without any adjustments. If you select Manual Mode, press the Naviga- For detail information, contact your internet pro- tion and Number buttons. IP addresses will vider or router manual. need to be input manually. - Auto Input: Select this if there is a DHCP server (router) on the Local Area Network (LAN) via wired connection, the display... -
Page 21: Network Status
Many network connection problems during set up can often be fixed by re-setting the router Network Status or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router Press MENU to access the main menus. or cable modem. Then power on and/or connect Press the Navigation buttons to scroll to NET- the power cable again. WORK and press OK. Depending on the internet service provider (ISP), the number of devices that can receive Press the Navigation buttons to select Net- internet service may be limited by the applicable work Status. terms of service. For details, contact your ISP. LG is not responsible for any malfunction of the Press OK to check the network status. display and/or the internet connection feature When you are finished, press EXIT. due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment. LG is not responsible for problems within your internet connection. You may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection. Any fees charged by an ISP including, without limitation, connection charges are your respon- sibility. A 10 Base-T or 100 Base-TX LAN port is... -
Page 22: Connecting Usb Storage Devices
ENTERTAINMENT Connecting USB storage de- Tips for using USB storage devices vices Only a USB storage device is recognizable. If the USB storage device is connected Connect a USB storage device (external HDD, through a USB hub, the device is not recog- USB memory) to the USB port of Monitor to enjoy nizable. the content files stored in the USB device on your A USB storage device using an automatic Monitor. recognition program may not be recognized. A USB storage device which uses its own driver will not be recognized. The recognition speed of a USB storage device may depend on each device. Please do not turn off the display or unplug the USB device when the connected USB storage device is working. When such a device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. CAUTION Please do not connect the USB storage device which was artificially maneuvered on Back up your files saved on a USB storage the PC. The device may cause the product to device frequently, as you may lose or dam- malfunction. Only use a USB storage device age the files and this may be not covered by which has normal music files, image files or the warranty. - Page 23 ENTERTAINMENT If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected. If the USB memory device does not work properly, disconnect and reconnect it. How fast a USB memory device is detected differs from device to device. If the USB is connected in Standby Mode, that drive will automatically be loaded when the display is turned on. The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory. Any device with more than the recommended capacity may not work properly. If a USB external hard disk with a “Energy Saving” function does not work, turn the hard disk off and on again to make it work properly. USB storage devices below USB 2.0 are supported as well. But they may not work properly with videos. A maximum of 999 folders or files can be recognized under one folder. It is recommended you use a certified USB storage device and cable. Otherwise, a USB storage device may not be detected or a playback error may occur. Only a USB memory stick can be used to play back the files distributed and stored by SuperSign Manager. A USB hard disk or multi-card reader will not work.
-
Page 24: Using My Media
ENTERTAINMENT Using My Media Provides video/ photo/ music files on your Monitor by connecting to a USB device Connecting a USB device. Press INPUT to access the INPUT LIST. Press the Navigation buttons to scroll to USB device and press OK. Press the Navigation buttons to scroll to the VIDEO/ PHOTO/ MUSIC you want and press OK. Displays video/ photo/ music files on all devices connected to the Monitor. MY MEDIA Contents Type VIDEOS PHOTOS MUSIC Supported File Formats Supporting file Maximum data transfer rate : 20 Mbps (megabits per second) External subtitle formats supported : *.smi, *.srt, *.sub (MicroDVD, SubViewer 1.0/2.0), *.ass, *.ssa, *.txt (TMPlayer), *.psb (PowerDivX) Internal subtitle formats supported : XSUB (supports internal subtitles generated from DivX6) - Page 25 ENTERTAINMENT Type Supporting file Video y Maximum: 1920 x 1080 @30p Extension Codec VC-1 Advanced Profile, VC-1 Simple and Video .asf Main Profile .wmv Audio WMA Standard, WMA 9 Professional DivX3.11, DivX4, DivX5, DivX6, Video XViD, H.264/AVC, Motion Jpeg .divx MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), .avi Audio Dolby Digital, Dolby Digital Plus, LPCM, ADPCM, DTS .mp4 Video H.264/AVC, MPEG-4 Part 2 .m4v Audio .mov Video H.264/AVC .mkv Audio HE-AAC, Dolby Digital Video H.264/AVC, MPEG-2, VC-1 .ts .trp MPEG-1 Layer I, II, MPEG-1 Layer III (MP3) Audio Dolby Digital, Dolby Digital Plus, AAC...
-
Page 26: Playing Video
ENTERTAINMENT Playing video Controls playback and sets options while viewing videos. In the MY MEDIA screen, press the Navigation button to scroll to Video and press OK. Press the Navigation buttons to scroll to the file you want and press OK. Selects the desired point and plays. Option List Plays Sets options. Stops playback and returns to the list. Remote Description Button Stops the playback Plays a video Pauses or resumes the playback Scans backward in a file Scans forward in a file Show the Option menu. MENU Return to Movie List. BACK Skips to specific points in a file during playback. The time of a specific point will appear on the status bar. In some files, this function may not work properly. ENERGY Press the ENERGY SAVING button repeatedly to increase the brightness of your screen. - Page 27 ENTERTAINMENT Tips for using playing video files NOTE Some special characters are not supported Only 10,000 of sync blocks are supported in subtitles. within a subtitle file. HTML tags are not supported in subtitles. When playing a video, you can adjust the Subtitles in languages other than the sup- Picture Size by pressing the ARC button. ported languages are not available. Subtitles in your language are only sup- The screen may suffer temporary interrup- ported when the OSD menu is also in this tions (image stoppage, faster playback, etc.) language. when the audio language is changed. The code page options may be disabled de- A damaged movie file may not be played pending on the language of the subtitle files. correctly, or some player functions may not Select the appropriate code page for the be usable. subtitle files. If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. HD videos with a maximum of 1920x1080@25/30P or 1280x720@50/60P CAUTION are supported, depending on the frame. Videos with resolutions higher than Some subtitles created by users may not 1920X1080@25/30P or 1280x720@50/60P work properly.
-
Page 28: Viewing Photos
ENTERTAINMENT Viewing photos Controls playback and sets options while viewing pictures in full screen. In the MEDIA screen, press the Navigation button to scroll to PHOTO and press OK. Press the Navigation buttons to scroll to the file you want and press OK. Slideshow Option List Displays photos Plays background Rotates or enlarges Sets options. Stops playback as a slideshow. music. the picture. and returns to the list. -
Page 29: Listening To Music
ENTERTAINMENT Listening to music Controls playback and sets options while playing music. In the MEDIA screen, press the Navigation button to scroll to MUSIC and press OK. Press the Navigation buttons to scroll to the file you want and press OK. Option List Plays Selects the desired point Sets options. Returns to the and plays list Remote Description Button Stops playback Plays a music file Pauses or resumes playback Skips to the next file Skips to the previous file When playing, When you press the button, the previous music file will be played. or When you press the button, the next music file will be played. ENERGY Press the ENERGY SAVING button repeatedly to increase the brightness of your screen. SAVING MENU Show the Option menu. -
Page 30: Customizing Settings
ENTERTAINMENT CUSTOMIZING SETTINGS PICTURE settings PICTURE Energy Saving : Off Press the Navigation buttons to scroll to PICTURE. Smart Energy Saving : Off Picture Mode : Standard (User) Press the Navigation buttons to scroll to the setting Backlight or option you want and press OK. Contrast - To return to the previous level, press BACK. Brightness Sharpness When you are finished, press EXIT. Color When you return to the previous menu, press BACK. Tint Color Temp. Advanced Control Picture Option Picture Reset Aspect Ratio Picture Wizard Screen... - Page 31 ENTERTAINMENT Setting Description Picture Mode Selects the picture mode optimized for the viewing environment or the programme. Mode Intelligent Detects the ambient illumination and automatically adjusts the Monitor's Sensor brightness level to reduce power consumption. Automatically adjusts brightness, sharpness, color or tint for optimum picture quality. Vivid Heightens contrast, brightness and sharpness to display vivid images. Standard Displays images in standard levels of contrast, brightness and sharpness. Cinema/ Game Displays images that have been optimized for movies or games. Menu for adjusting picture quality that allows experts and amateurs to enjoy the Expert1, 2 best Monitor viewing. This menu is ISF-certified and provided for picture tuning experts. (ISF logo can only be used on ISF-certified Monitor units.) ISFccc: Imaging Science Foundation Certified Calibration Control Aspect Ratio Changes the image size to view images at its optimal size (See p.34). Picture Wizard Use the remote control and follow the instructions of the Picture Wizard to calibrate and adjust for optimum picture quality without expensive pattern devices or help from a specialist. Follow the instructions to obtain the optimum picture quality. Screen Adjusts picture in RGB-PC mode. (In RGB Option Mode Only) Resolution Selects a proper resolution. See “Customizing PC display options”.
- Page 32 ENTERTAINMENT Picture Mode options Setting Description Backlight Adjusts the display brightness by varying the brightness of the LCD panel. Contrast Adjusts the difference between bright and dark regions of the screen. Brightness Adjusts the overall screen brightness. Sharpness Adjusts the sharpness of the borders between bright and dark. Color Adjusts the color on the screen darker or lighter. Tint Adjusts the red/green color balance. Color Temp. Adjusts the overall tone of color to warm or cool. Advanced Control Adjusts the advanced options. Refer to the Advanced image options. Picture Option Adjusts detailed setting for images. Picture Reset Restores the options to the default setting. Each picture mode is reset. Select the picture mode you wish to reset. Advanced image options Setting Description Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image. Dynamic Color Adjusts color for more natural-looking colors.
- Page 33 ENTERTAINMENT Picture Option Setting Description Noise Reduction Reduces screen noise in the video. MPEG Noise Reduces noise caused by compressing digital video. Reduction Black Level Adjusts the brightness or darkness of the screen to suit the black level of the picture input using the degree of darkness (black level) of the screen. Real Cinema Optimizes the screen for movie viewing. Eye Care Adjusts screen brightness to prevent eye glare. (Depending on model) LED Local Dimming Brightens bright areas and darkens dark areas of the image for maximum contrast and minimum blur while reducing power consumption. Off: Turns off LED Local Dimming. Low: Expresses natural black tones. Uses this setting for viewing movies. Medium: Deepens black tones compared to Low. High: Deepens black tones and delivers clearer image than Medium. Perfect for viewing in brightly lit areas. Trumotion Corrects images to display smoother motion sequences. Off: Turns off LED Local Dimming. Smooth: De-Judder / De-Blur value is set to 3. Clear: De-Judder / De-Blur value is set to 7.
-
Page 34: Using The Additional Options
ENTERTAINMENT Using the additional options Adjusting aspect ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching content. CAUTION If a fixed image displays on the screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. NOTE You can also change the image size by accessing the main menus. MODE Display DVI-D HDMI Port 16:9 Just Scan Original Zoom Cinema Zoom 1... - Page 35 ENTERTAINMENT - 16:9 : This selection will allow you to adjust the - 4:3 : This selection will allow you to view a picture horizontally, in linear proportion, to fill the picture with an original 4:3 aspect ratio, black entire screen(useful for viewing 4:3 formatted bars will appear on both the left and right of the DVDs). screen. - Just Scan : This Selection will allow you view - Zoom : This selection will allow you to view the the picture of best quality without loss of original picture without any alteration, while filling the picture in high resolution image. Note: If there is entire screen. However, the top and bottom of noise in original Picture, You can see the noise the picture will be cropped. at the edge. Just Scan - Original : The aspect ratio is not adjusted - Cinema Zoom 1 : Choose Cinema Zoom from the original. It is set by the program being when you want to enlarge the picture in correct watched. proportion. Note: When enlarging or reducing the picture, the image may become distorted. Original...
-
Page 36: Sound Settings
Sets audio optimized for a specific genre. Sport/ Game Vivid Delivers distinct voices with rich bass and clear, high-pitched sounds. User Setting Adjusts the volume to a level of your choice using the User EQ. User - 100 Hz/ 300 Hz/ 1 kHz/ 3 kHz/ 10 kHz : Sets EQ by manual adjustment of sound bands. - Reset : Resets the equalizer value changed by the user. Virtual Surround LG’s proprietary audio processing technology allows 5.1ch-like surround sound from two speakers. * If Clear Voice ll is set to On, Virtual Surround will not be chosen. Clear Voice ll Boosts voice clarity. AV Sync. Synchronizes video and audio directly when they do not match. If you set AV Sync. to ON, you can adjust the sound output to the screen image. Speaker: Adjusts the synchronization of the sound from the speakers. The "-" button makes the sound output faster and the "+" button slower than the default value. Bypass : The audio of an external device without audio delay. Audio may be output before video as it takes time to process video input into the Monitor. -
Page 37: Time Settings
ENTERTAINMENT TIME settings TIME Clock Press the Navigation buttons to scroll to TIME. Off Time : Off OnTime : Off Press the Navigation buttons to scroll to the setting Sleep Timer : Off or option you want and press OK. Power On Delay : Off - To return to the previous level, press BACK. Auto Off : Off When you are finished, press EXIT. Automatic Standby : Off When you return to the previous menu, press BACK. The available TIME settings are described in the following: Setting Description Clock Checks or changes the time. Off Time/ On Time Sets the Off/On time. -
Page 38: Option Settings
CUSTOMIZING SETTINGS OPTION settings OPTION Language Press the Navigation buttons to scroll to OPTION. Power Indicator ISM Method : Normal Press the Navigation buttons to scroll to the setting Key Lock : Off or option you want and press OK. Fail Over : Off - To return to the previous level, press BACK. Portrait Mode : Off DPM Select : Off When you are finished, press EXIT. DivX(R) VOD When you return to the previous menu, press BACK. SimpLink Initial Setting Set ID PC Power Control : Off Interface Select... - Page 39 CUSTOMIZING SETTINGS Setting Description DivX(R) VOD Registers or releases DivX. Checks DivX Registration Code for playing DivX-protected videos. Register at http://vod.divx.com. Uses Registration Code to rent or purchase movies at www.divx.com/vod. * Rented/purchased DivX files cannot be played if the DivX Registration Code of a different device is used. Use only the DivX Registration Code granted to this device. * Converted files not conforming to the DivX Codec Standard may not play or may produce abnormal images and sound. SimpLink SimpLink is a feature that enables you to control and manage various multimedia devices conveniently using the Monitor remote control. Initial Setting Deletes all optional settings and returns to initial default mode. Set ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 255) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. PC Power Control Controls the power of the monitor with Media Player turned on. On: Turns on or off the monitor with Media Player on. Off: Turns on or off the whole system. Interface Select Sets communication with Media Player and the connected PC. Option RS232C Communicates with the connected PC in serial mode. SuperSign Communicates with Media Player. NOTE The ISM Method function does not work properly in Portrait Mode.
-
Page 40: Network Settings
CUSTOMIZING SETTINGS NETWORK settings NETWORK Network Connection Press the Navigation buttons to scroll to NETWORK. Network Status Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT. When you return to the previous menu, press BACK. The available NETWORK settings are described in the following: Setting Description Network Configure the network settings. Connection Network Status Display the network status. SUPPORT settings SUPPORT Product/Service Info. Press the Navigation buttons to scroll to SUPPORT. Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT. When you return to the previous menu, press BACK. The available SUPPORT settings are described in the following: Setting Description Displays the model name, software version, serial number, used time, MAC address and homep- Product/Service age information. -
Page 41: Making Connections
CUSTOMIZING SETTINGS MAKING CONNECTIONS Connect various external devices to the ports on the Monitor’s back panel. Find an external device you want to connect to your Monitor shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details. HD Receiver HDMI - See p.42 HDMI - See p.42 AV(CVBS) - See p.43 AV(CVBS) - See p.43 AV(CVBS) - See p.43 DVI-D - See p.17 DVI-D - See p.17 Speaker Memory storage – See p.22 Gaming device Camcorder/Camera RGB - See p.17 HDMI - See p.42 HDMI - See p.42 DVI-D - See p.17 AV(CVBS) - See p.43 AV(CVBS) - See p.43 HDMI - See p.18 Display Port - See p.18 LAN - See p.44 NOTE If you connect a gaming device to the Monitor, use the cable supplied with the gaming device. -
Page 42: Connecting To A Hd Receiver, Dvd, Camcorder, Camera, Gaming Device Or Vcr Player
CUSTOMIZING SETTINGS Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or VCR player Connect a HD receiver, DVD, or VCR player to the Monitor and select an appropriate input mode. HDMI connection Transmits the digital video and audio signals from an external device to the Monitor. Connect the external device and the Monitor with the HDMI cable as shown on the following illustration. Back of the product. (not included) (not included) NOTE Use a High Speed HDMI™ Cable. High Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. -
Page 43: Av(Cvbs) Connection
CUSTOMIZING SETTINGS AV(CVBS) connection Transmits the analog video and audio signals from an external device to the Monitor. Connect the external device and the Monitor with the 15 pin signal to RCA cable as shown on the following illustration. Back of the product. (not included) AUDIO VIDEO (not included) -
Page 44: Connecting To A Usb
CUSTOMIZING SETTINGS Connecting to a USB Connecting to the LAN Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or Connect PC to Monitor directly. a USB memory card reader to the Monitor and access the USB menu to use various multimedia files. Monitor Using a router(Switch) Switch Network Monitor Network Using the Internet. Network Monitor NOTE Using LAN establishes communication between your PC and the monitor and enables you to use the OSD menus on the PC as well as on the monitor. -
Page 45: Daisy Chain Monitors
CUSTOMIZING SETTINGS Daisy Chain Monitors Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box. To use different products connected to each other connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products Monitor 1 Monitor 2 Monitor 3 Monitor 4 15-pin D-Sub Signal Cable (Max 3m) RGB OUT (PC) Mode NOTE The number of monitors that can be connected to one output may vary depending on signal status and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to 9 monitors. If you want to connect more than this number of monitors, it is recommended to use a distributor. When multi-connecting in/out cascade format, no loss cables are recommended. When using an HDMI - DVI conversion cable or a gender, it may not be compatible with the product due to the characteristics of the signal. -
Page 46: Troubleshooting
CUSTOMIZING SETTINGS TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord y S ee if the power cord is properly connected to the outlet. connected? Is the power indicator light on? y See if the power switch is turned on. y May need service. P ower is on, power indicator y Adjust brightness and contrast again. is red but the screen appears y Backlight may need repair. extremely dark. The power indicator amber? y I f the product is in power saving mode, move the mouse or press any key. y Turn both devices off and then back on. D oes the 'Out of range' y T he signal from the PC (video card) is out of the vertical or horizontal message appear? frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. - Page 47 CUSTOMIZING SETTINGS 'Key Lock On' message appears. Problem Resolution The 'Key Lock On' message The Lock function prevents the OSD settings from being changed appears when pressing the inadvertently. To release the lock, go to Menu and Option and disable Menu button. the Key Lock option. The screen image looks abnormal. Problem Resolution Is the screen position wrong? y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. y See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. Do thin lines appear on the y D -Sub analog signal - Press the "AUTO" button in the remote control background screen? to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu.
- Page 48 CUSTOMIZING SETTINGS The audio function does not work. Problem Resolution No sound? y See if the audio cable is connected properly. y Adjust the volume. y S ee if the sound is set properly. Sound is too dull. y A djust the Clear Voice ll, Treble and Bass appropriately. Sound is too low. y A djust the volume. Screen color is abnormal. Problem Resolution Screen has poor color resolution y S et the number of colors to more than 24 bits (true color) Select (16 colors).
-
Page 49: Specifications
SPECIFICATIONS SPECIFICATIONS LCD Panel Screen Type 2134.62 mm Wide (84 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 2134.62 mm Pixel Pitch 0.4845 mm (H) x 0.4845 mm (V) Video Signal Max. Resolution RGB, DVI-D : 1920 X 1080 @60 Hz HDMI, Display Port : 3840 X 2160 @30 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB, DVI-D : 1920 X 1080 @60 Hz HDMI, Display Port : 3840 X 2160 @30 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI,DVI-D, Display Port : 30 kHz to 83 kHz Vertical Frequency RGB : 56 Hz to 75 Hz HDMI,DVI-D, Display Port : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub(RGB), HDMI, DVI-D, Composite(AV), Display Port, RS-232C, LAN, USB, Audio Power Rated Voltage 100-240 V~ 50/60 Hz 5.7 A Power Consumption On Mode : 350 W Typ. Sleep Mode (RGB) : ≤ 1.5 W Sleep Mode (HDMI, DVI-D, Display Port) : ≤ 1.5 W (Set Only) / ≤ 2 W (With External Device) Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions Operating Humidity... - Page 50 SPECIFICATIONS RGB (PC) supported mode HDMI/Display Port (PC) supported mode Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(kHz) Frequency(Hz) Frequency(kHz) Frequency(Hz) 31.469 70.8 31.469 59.94 640 x 350 640 x 480 31.468 70.8 37.879 60.317 720 x 400 800 x 600 31.469 59.94 48.363 640 x 480 1024 x 768 37.5 44.772 59.855 640 x 480 1280 x 720 37.879...
- Page 51 SPECIFICATIONS DTV Mode Resolution HDMI, Display Port (DTV) 480i 480p 576i 576p 720p 1080i 1080p Power Indicator Mode Product On Mode Sleep Mode Amber Off Mode NOTE When the cable is connected to the HDMI or the Display port, you can select the PC/DTV mode optionally. It is recommended you to set to the PC mode when connecting to PC; the DTV mode when connecting to DTV.
- Page 52 SPECIFICATIONS Dimensions The illustrations in this manual may differ from the actual product and accessories. Please see the "Mounting on a wall" section for sizes of screws. ( See p.12 ) (Unit : mm) 1923.4 27.9 27.9 661.7 4-M8 (Wall mounting screw) Depth 19.8 mm(Max) Product specifications shown above may be changed without prior notice due to upgrade of product functions.
-
Page 53: Ir Codes
IR CODES IR CODES Code (Hexa) Function Note R/C BUTTON R/C BUTTON ON/OFF R/C BUTTON R/C BUTTON (Discrete IR Code) R/C BUTTON (Discrete IR Code) R/C BUTTON R/C BUTTON Down R/C BUTTON Left R/C BUTTON Right R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON Volume R/C BUTTON Volume R/C BUTTON ( UP) R/C BUTTON ( Down) R/C BUTTON 10 to 19 Number Key to R/C BUTTON Red Key... -
Page 54: Controlling The Multiple Product
CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 255 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC. Monitor 1 Monitor 2 Monitor 3 Monitor 4 RS-232C Cable (not included) RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations (Not Standard) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 (Female) (Female) (Female) (Female) Communication Parameter Baud Rate : 9600 buad Rate (UART) Data Length : 8 bit Parity Bit : None... -
Page 55: Command Reference List
CONTROLLING THE MULTIPLE PRODUCT Command reference list COMMAND DATA 01 Power 00H to 01H 02 Aspect Ratio 01H to 1FH 03 Screen Mute 00H to 01H 04 Volume Mute 00H to 01H 05 Volume Control 00H to 64H 06 Contrast 00H to 64H 07 Brightness 00H to 64H 08 Color 00H to 64H 09 Tint 00H to 64H 10 Sharpness 00H to 32H 11 OSD Select 00H to 01H 12 Remote Lock/ key Lock 00H to 01H... - Page 56 CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA 42 S / W Version 43 Time 1(Years/ Months/ Days) Refer to ‘Time 1’ 44 Time 2(Hours/ Minutes/Seconds) Refer to ‘Time 2’ 45 Off Time Schedule 00H to 01H 46 On Time Schedule 00H to 01H 47 Off Timer(Repeat mode/ Time) Refer to ‘Off Timer’ 48 On Timer(Repeat Mode/ Time) Refer to ‘On Timer’ 49 On Timer Input Refer to ‘On Timer Input’ 50 H Position 00H to 64H 51 V Position 00H to 64H 52 H Size 00H to 64H 53 Input Select 20H to D0H 54 Color Temperature 00H to 64H...
-
Page 57: Transmission/ Receiving Protocol
CONTROLLING THE MULTIPLE PRODUCT Transmission/ Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1]: First command. (k, j, m, d, f, x) * [Command 2]: Second command.(a to z) * [Set ID]: Set up the Set ID number of product. range : 01H to 63H. by setting '0', server can control all products. * In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack message. Because all sets will send the ack message, so it's impossible the check the whole ack messages. * [DATA]: To transmit command data. Transmit 'FF' data to read status of command. * [Cr]: Carriage Return (ASCII code '0 x 0 D') * [ ]: ASCII code Space (0 x 20) OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] * The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. * Note : In this mode, display will send the acknowledgement after power on processing completion. There might be a time delay between command and acknowledgement. * No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00). Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] * If there is error, it returns NG... - Page 58 CONTROLLING THE MULTIPLE PRODUCT * Real data mapping 03. Screen Mute(Command: k, d) To select screen mute on / off. Hexadecimal Num. Decimal Num. (Setting Value) (Real Value) Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00: Screen on 01: Screen off Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] 01. Power(Command: k, a) 04. Volume Mute(Command: k, e) To control Power On/Off of the set. To control On/Off of the Volume Mute. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr]...
- Page 59 CONTROLLING THE MULTIPLE PRODUCT 06. Contrast(Command: k, g) 09. Tint(Command: k, j) To adjust screen contrast. To adjust the screen tint. You can also adjust the contrast in the Picture menu. You can also adjust the tint in the Picture menu. Transmission Transmission [k][g][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr] Data Data Min. 00H to Max. 64H : 0~100 Min. 00H to Max. 64H * Refer to 'Real data mapping’. 00H: Step R50 64H: Step G50 Acknowledgement * Refer to 'Real data mapping’. [g][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 07. Brightness(Command: k, h) 10. Sharpness(Command: k, k) To adjust screen brightness.
- Page 60 CONTROLLING THE MULTIPLE PRODUCT 12. Remote Lock /Key Lock(Command: k, m) 15. White Balance Red Gain(Command: j, m) To control Remote Lock on/off to the set. To adjust white balance red gain. This function, when controlling RS-232C, locks the Transmission remote control and the local keys. [j][m][ ][Set ID][ ][Data][Cr] Transmission Data [k][m][ ][Set ID][ ][Data][Cr] 00~FE: Red gain 0~254 Data Acknowledgement 00: Off [m][ ][Set ID][ ][OK/NG][Data][x] 01: On Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 13. Balance(Command: k, t) 16. White Balance Green Gain(Command: j, n) To adjust the sound balance.
- Page 61 CONTROLLING THE MULTIPLE PRODUCT 18. ISM Method(Command: j, p) 21. Remote Key(Command: m, c) Used to select the afterimage preventing function. To send IR remote key code. Transmission Transmission [j][p][ ][Set ID][ ][Data][Cr] [m][c][ ][Set ID][ ][Data][Cr] Data Data: Refer to ‘IR CODES’. 20: Color Wash Acknowledgement 08: Normal [c][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 19. Energy Saving(Command: j, q) 22. Backlight(Command: m, g) To reduce the power consumption of the Monitor. To adjust light of the Backlight. Transmission Transmission [j][q][ ][Set ID][ ][Data][Cr] [m][g][ ][Set ID][ ][Data][Cr]...
- Page 62 CONTROLLING THE MULTIPLE PRODUCT 24. Fail Over Input Select(Command: m, j) 27. PC Power(Command: d, s) To select fail over mode. To control the PC power when the PC and the * Only available in Fail Over is Manual mode. monitor are not synchronized. Transmission Transmission [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ] [d][s][ ][Set ID][ ][Data][Cr] [Data4][ ][Data5][Cr] Data Data1~5(Priority 1~5) 00: PC it turned off. 60: RGB 01: PC is turned on. 70: DVI-D Acknowledgement 90: HDMI1 [s][ ][Set ID][ ][OK/NG][Data][x] 91: HDMI2 C0: Display Port * Use 0x70 as data for DVI-D input, 0x90 as data for HDMI1 input, 0x91 as data for HDMI2 input, 0xC0 as data for DisplayPort input, regardless their input labels. Acknowledgement [j][ ][Set ID][ ][OK/NG][Data1][Data2] [Data3][Data4][Data5][x]...
- Page 63 CONTROLLING THE MULTIPLE PRODUCT 29. Sound Mode(Command: d, y) 32. Speaker(Command: d, v) To adjust the Sound mode. Turn the speaker on or off. Transmission Transmission [d][y][ ][Set ID][ ][Data][Cr] [d][v][ ][Set ID][ ][Data][Cr] Data Structure Data 00: Off Data(Hex) Mode 01: On Standard Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Music Cinema Sport Game Vivid User Setting Acknowledgement 33. Sleep Timer(Command: f, f) [y][ ][Set ID][ ][OK/NG][Data][x] Set Sleep Timer.
- Page 64 CONTROLLING THE MULTIPLE PRODUCT 35. Power On Delay(Command: f, h) 38. Reset(Command: f, k) Execute the Picture, Screen and Factory Reset Set the schedule delay when the power is turned on (Unit: second). functions. Transmission Transmission [f][h][ ][Set ID][ ][Data][Cr] [f][k][ ][Set ID][ ][Data][Cr] Data Data Min. 00H to Max. 64H : 0~100 seconds 00 : Picture Reset (Reset the values set in the PICTURE menu.) * Refer to 'Real data mapping’. 01 : Screen Reset Acknowledgement (Reset the values set in under the Screen option.) [h][ ][Set ID][ ][OK/NG][Data][x] 02 : Factory Reset (Reset the values set in the OPTION menu.) 03 : Audio Reset (Reset the values set in the AUDIO menu.) Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 36. Language(Command: f, i) Set the OSD language.
- Page 65 CONTROLLING THE MULTIPLE PRODUCT 41. Serial no.Check(Command: f, y) 44. Time 2(Hours/Minutes/Seconds)(Command: f, x) Check the Serial no. To set Time 2 (Hours/ Minutes/ Seconds). Transmission Transmission [f][y][ ][Set ID][ ][Data][Cr] [f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1 FF: Check the Serial no. 00 - 17: 00 - 23 hours Data2 Acknowledgement 00 - 3B: 00 - 59 minutes [y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x] Data3 00 - 3B: 00 - 59 seconds * To check the settings of the Time 2, enter "fx [Set ID] ff". ** If the Time 1 is not set, this command does not work. Acknowledgement [x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 42. S/W Version(Command: f, z) 45.
- Page 66 CONTROLLING THE MULTIPLE PRODUCT To delete Off Time (Repeat mode/Hours/Minutes). 47. Off Timer(Repeat mode/Time)(Command: f, e) To set Off Time (Repeat mode/Time). Transmission [f][e][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr] Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data e0: Delete all Data1 e1 - e7: Delete from the first to the seventh index of 01: Once the Off Time list 02. Daily 03: Mon. - Fri. Acknowledgement 04: Mon. - Sat. [e][ ][Set ID][ ][OK/NG][Data][ff][ff][x] 05: Sat. - Sun. Data 06. Every Sunday e0: Delete all 07. Every Monday e1 - e7: Delete from the first to the seventh index of 08. Every Tuesday the Off Time list 09. Every Wednesday 0A. Every Thursday 0B. Every Friday 0C. Every Saturday Data2 00 - 17: 00 - 23 hours Data3 00 - 3B: 00 - 59 minutes...
- Page 67 CONTROLLING THE MULTIPLE PRODUCT 48. On Timer(Repeat mode/Time)(Command: f, d) To delete On Time (Repeat mode/Hours/Minutes). To set On Time (Repeat mode/Time). Transmission [f][e][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr] Transmission [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data Data1 e0: Delete all 01: Once e1 - e7: Delete from the first to the seventh index of 02. Daily the Off Time list 03: Mon. - Fri. Acknowledgement 04: Mon. - Sat. [e][ ][Set ID][ ][OK/NG][Data][ff][ff][x] 05: Sat. - Sun. Data 06. Every Sunday e0: Delete all 07. Every Monday e1 - e7: Delete from the first to the seventh index of 08. Every Tuesday the On Time list 09. Every Wednesday 0A. Every Thursday 0B. Every Friday 0C. Every Saturday Data2 00 - 17: 00 - 23 hours Data3 00 - 3B: 00 - 59 minutes...
- Page 68 CONTROLLING THE MULTIPLE PRODUCT 49. On Timer Input(Command: f, u) 51. V Position(Command: f, r) Select the video input when using On Timer. To set the vertical position of the screen. * This function is only available when there is RGB Transmission input signal. [f][u][ ][Set ID][ ][Data][Cr] Transmission Data [f][r][ ][Set ID][ ][Data][Cr] 20: AV 60: RGB Data 70: DVI-D Min. 00H to Max. 64H: Min. -50 (down) - Max. 50 (up) 90: HDMI1 * Data input range may vary depending on the reso- 91: HDMI2 lution. C0: Display Port Acknowledgement B0: SuperSign [r][ ][Set ID][ ][OK/NG][Data][x] * If the Time 1, 2, and On Time (Repeat mode/Time) are not set, this command does not work. * To set the On Time schedule correctly, the On Timer (Repeat mode/Time) command must be executed prior to this command.
- Page 69 CONTROLLING THE MULTIPLE PRODUCT 54. Color Temperature(Command: x, u) To adjust the screen color temperature. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data 00~64: Warm 50 ~ Cool 50 Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]...
- Page 70 In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.