Level 2 Power Board - HP ProLiant SL250s Gen8 Maintenance And Service Manual

•
Front GPU
•
Rear GPU
To replace the component, reverse the removal procedure.

Level 2 power board

To remove the component:
Power down the server (on page 24).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 24).
3.
If removing from the left node, remove the interposer board
4.
on page 26).
Disconnect both GPU power cables from the level 2 power board.
5.
("Remove the interposer board
Removal and replacement procedures 33
assembly"