Dimms - HP ProLiant SL250s Gen8 Maintenance And Service Manual

Remove the FlexibleLOM riser cage.
8.
Remove the FlexibleLOM riser board.
9.
To replace the component, reverse the removal procedure.

DIMMs

To remove the component:
Power down the server (on page 24).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 24).
3.
Remove the front GPU cage (on page 26).
4.
Remove the interposer board assembly (on page 26).
5.
Remove the front GPU bracket (on page 27).
6.
Remove the processor air baffle
7.
("Processor air baffle" on page 44).
Removal and replacement procedures 43