Front Gpu/Pci Riser Board; Interposer Board - HP ProLiant SL250s Gen8 Maintenance And Service Manual

To replace the component, reverse the removal procedure.

Front GPU/PCI riser board

To remove the component:
CAUTION:
remove all AC power cords before removing or installing the PCI riser board assembly.
Power down the server (on page 24).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 24).
3.
Remove the front GPU cage (on page 26).
4.
Remove the interposer board assembly (on page 26).
5.
Remove the front GPU bracket (on page 27).
6.
Remove the SFF hot-plug drive cage (on page 25).
7.
Remove the PCI riser cage (on page 27).
8.
Remove the front GPU/PCI riser board from the PCI riser cage assembly.
9.
To replace the component, reverse the removal procedure.

Interposer board

To remove the component:
Power down the server (on page 24).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server from the chassis (on page 24).
3.
Remove the interposer board assembly (on page 26).
4.
To prevent damage to the server or expansion boards, power down the server and
Removal and replacement procedures 41