Frequency Offset (Offset) - Menu No. 26 - Midland CT690 User Manual

Frequency offset (OFFSET) - MENU No. 26

In this MENU you can set the deviation between tx and rx.
The frequency offset of this radio is 0-69.990MHz.
This function is used for repeaters.
Channel store - (MEM-CH) - MENU No. 27
When the radio is in frequency working mode or standby mode, input the de-
sired frequency or parameters directly.
To set a CTCSS tone or a DCS code in tx or rx on the stored channel, refer to
paragraphs MENU 10-13
Note: You cannot overwrite a stored channel, you have to delete it first. See fol-
lowing paragraph No.28.
Channel Delete (DEL-CH) - MENU No.28
In this menu you can delete a channel of the radio.
Standby backlight (WT-LED) - MENU No.29
In this MENU you can choose the color of the backlight when the radio is in
standby mode.
You can choose amongst :
OFF (backlight off)
GREEN
RED
ORANGE
RX backlight (RX-LED) - MENU No. 30
In this MENU you can choose the backlight color when the radio is receiving.
You can choose amongst :
OFF (backlight off)
GREEN
RED
ORANGE
TX backlight (TX-LED) - MENU No.31
You can choose the backlight color when the radio is transmitting.
Available colors:
20 | CT690 user's manual