Dyson HD01 Manual page 6

persons in order to avoid
a hazard.
6. This appliance has a non-
self resetting thermal cut
out safety device to prevent
overheating. If your appliance
cuts out, unplug it from the
mains supply socket and
leave to cool.
7. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal
cut-out, this appliance must
not be supplied through an
external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility company, or plugged
into any socket where the
electrical supply is unstable or
likely to be turned off.
8. For additional protection,
the installation of a residual
current device (RCD) having
a rated residual operating
current not exceeding 30 mA
is advisable. Ask your installer
for advice.
9. Do not use the appliance
for any other purpose than
drying hair.
10. Do not handle any part of
the plug or appliance with
wet hands.
11. Do not unplug by pulling on
the cable. To unplug, grasp
the plug, not the cable.
6