Network Status Led - Danfoss MCD 200 Installation Instructions Manual

MCD Modbus Module Instructions

5. Network Status LED

The Network Status LED indicates the state of the
communications link between the module and the network.
LED operation is as follows:
Off
No connection or soft starter not
powered up
On
Communication active
N.B.!:
If communication is inactive, the soft starter may trip if the Communications Timeout
function has been set on the module. When communication is restored, the soft starter
will require a Reset.
MG.17.F5.02 - VLT® is a registered Danfoss trademark
LED
Flashing
Communication inactive
Network Status LED
3