Connect Peripheral Equipment; High Definition; Via The Scart; Via Aerial Input - Hyundai HLT 2601 HD Instruction Manual

Connect Peripheral Equipment

There is awide range of audio and video equip-
ment that can be connected to your TV.
The following connection diagrams show you
where the different (Optional) equipment should
be connected at the rear side of the TV.

High Definition

Your LCD Television is capable of displaying
High Definition pictures from devices such as
a High Definition Satellite Receiver or DVD
Player. These devices must be connected via
the HDMI socket (EXT-5) or Component
Socket (EXT-3). These sockets can accept
either 720p or 1080i signals.
Note: For proper connection of a device to HDMI
input of your TV via using a DVI-to-HDMI cable,
use PCAudio In input for sound connection.

Via The Scart

LCD TV has 2 Scart sockets. If you want to
connect peripherals (e.g. video, decoder, etc.)
which haveScart sockets to theTV, use SCART
1 or SCART 2.
If an external device is connected via theScart
sockets, the TV will be switched to AV mode
automatically.
• Do not connect Digital Set Top Box devices
via Scart 1.Use Scart 2.

Via Aerial Input

If you want to connect to your TV, peripherals
like video recorders or decoders, but the device
you want to connect does not have aScart
socket, you should connect it to the Aerial input
of the TV.
If the VCR is connected viaAerial input it is
suggested to use Programme 0.

Decoder

Cable TV offers you a wide choice of program-
mes. Most of them are free, others are to
be paid for by the viewer. This means that you
will need to subscribe to the broadcasting
organisation whose programmes you wish
to receive. This organisation will supply you a
corresponding decoder unit to allow the program-
mes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to SCART 1.

TV And Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCART sockets.

Playback NTSC

To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks
at the side of the TV.
Then, press AV button to select appropriate
source.

Copy Facility

Source selection for VCR recording.
• Select Feature menu.
• Select Ext-2 Out by pressing
• Select a source to copy the picture from that
source.
Search For And Store The Test
Signal Of The Video Recorder
• Unplug the aerial cable fromthe aerial socket
of your video recorder.
ENG - 73
ENG
/ button.