Table of Contents
Advertisement
DECK MECHANISM DISASSEMBLY
Gear Connector
Hole(A')+(A)
Chassis
Hole(B')+(B)
Gear Cam
27. Gear Drive (Fig. A-8-1)/
Gear Cam (Fig. A-8-2)/
Gear Connector (Fig. A-8-3)
1) Remove the Washer(W1) and lift up the Gear Drive.
2) Lift up the Gear Cam.
3) Lift up the Gear Connector.
NOTE
(1) When reassembling, confirm that the Hole (A) of the
Gear Connector is aligned to the Hole (A') of the Chassis
(Fig. A-8-3).
(2) When reassembling, confirm that the Hole (B) of the
Gear Cam is aligned to the Hole (B') of the Chassis (Fig.
A-8-2).
(3) When reassembling, confirm that the (C) part of the Gear
Cam is aligned to the (D) part of the Gear Drive as shown
Fig. B-3
Washer (W1)
Gear Drive
(Fig. A-8-1)
Hole(B)
Hole(A)
Hole(B')
H2
Fig. A-8
(Fig. B-3)
28. Bracket Assembly L/D Motor (Fig. A-8-4)
1) Unhook the three Hooks(H1),(H2) and push down the
Bracket Assembly L/D Motor.
57
Gear Cam
(Fig. A-8-2)
Gear Connector
(Fig. A-8-3)
Hole(A')
H1
(Fig. A-8-4)
Gear Cam (C)
Chassis
Bracket Assembly
L/D Motor
Gear Drive (D)
Hook (H1), (H2)
Advertisement
Table of Contents
