Gear Drive/Gear Cam/Gear Connector; Bracket Assembly L/D Motor - Aiwa HV-MC90 Service Manual

DECK MECHANISM DISASSEMBLY
Brake Assembly Capstan
(For 4HD Models)
Gear Connector
Hole (A')+(A)
Chassis
Hole (B')+(B)
Gear Cam
27. Gear Drive (Fig. A-8-1)/
Gear Cam (Fig. A-8-2)/
Gear Connector (Fig. A-8-3)
1) Remove the Washer(W1) and lift up the Gear Drive.
2) Lift up the Gear Cam.
3) Lift up the Gear Connector.
NOTE
(1) When reassembling, confirm that the Hole (A) of the
Gear Connector is aligned to the Hole (A') of the
Chassis (Fig. A-8-3).
(2) When reassembling, confirm that the Hole (B) of the
Gear Cam is aligned to the Hole (B') of the Chassis (Fig.
A-8-2).
(3) When reassembling, confirm that the (C) part of the
Gear Cam is aligned to the (D) part of the Gear Drive as
shown Fig. B-3
Washer (W1)
Gear Drive
(Fig. A-8-1)
Hole (B)
Hole (A)
Hole (B')
H2
Fig. A-8
(Fig. B-3)
28. Bracket Assembly L/D Motor (Fig. A-8-4)
1) Unhook the three Hooks(H1),(H2) and push down the

Bracket Assembly L/D Motor.

-67-
Gear Cam
(Fig. A-8-2)
Gear Connector
(Fig. A-8-3)
Hole (A')
H1
(Fig. A-8-4)
Gear Cam (C)
Chassis
Bracket Assembly
L/D Motor
Gear Drive (D)
Hook (H1), (H2)