Configuring Com600 Without Keyboard And Mouse - ABB COM600 series User Manual

1MRS756125
5.5.2.
COM600 series, version 4.1
User's Manual
If multiple network adapters are used in SAB600 computer, you must specify the one
that is used for the COM600 communication. In the Set Remoting Parameters utility,
select the IP address of the SAB600 network adapter used for the COM600 communic-
ation.
Figure 5.5.1-1 Setting Remoting Parameters in SAB600

Configuring COM600 without keyboard and mouse

A headless COM600 is delivered without a local display and keyboard. It is configured
using the web interface, remote desktop, and SAB600. In order to configure the COM600,
it should have the factory default settings.
Configuring a headless COM600:
1. Start the COM600 computer.
2. Connect the engineering computer to the COM600 computer with a web browser.
Use the Local LAN port (192.168.2.11). Login as COM600 user with the default
password.
In order to connect, you may have to temporarily change
the IP settings of the engineering computer to use the
same subnet as the COM600 computer.
Set Remoting Parameters SAB600.png
45