Residual Risks - Stanley SDR1400 Original Instructions Manual

d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.
In accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5. Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Additional power tool safety warnings for paddle
mixer.
♦ Never clamp the product into a vice or to a work bench
to use as a stationary tool. This may cause serious
injury.
♦ Switch the product off immediately if the tool
attachment jams. Be prepared for high reaction torques,
which could cause kickbacks. The tool attachment will
jam if the product is overloaded or becomes twisted in
the workpiece.
♦ Wear protective clothing, dust masks and protective
gloves when using this product. While this product is
being used, dust may be created or splashing may
occur and material or liquids may be flung around.
Many types of dust are deemed to be carcinogenic.
♦ Always operate the product with both hands on the
handles. Keep a firm grip on the handles and ensure
you footing is secure on a stable, level and dry ground.
Loss of control over the product can cause personal
injury.
♦ Do not use this product to process substance which
is highly flammable or potentially explosive such as
solvents. Using this product will create sparks which
can ignite vapours.
♦ Use this product indoors only. Moisture and rain can
damage the product or can lead to electrocution. from
the power supply, if stirred material penetrates into
the inside of the product or if the product falls into the
ENGLISH
material being stirred. Have the product inspected by a
professional electrician. Stirred material and moisture
can damage the product or lead to electrocution, if they
penetrate inside the product.
♦ Do not work with any substances which are harmful
to health. Many materials are noxious when they
are processed. Do not breathe in any unhealthy
substances and avoid contact with your skin. Follow the
manufacturers' instructions and wear suitable personal
protective equipment.
♦ Wait until the product has come to a complete standstill,
before removing it from the material being stirred and
putting it down. The bucket can get jammed or stirred
material can be flung around. This can lead to a loss of
control over the product.

Residual risks.

Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
♦ Injuries caused by touching any rotating/moving parts.
♦ Impairment of hearing.
♦ Risk of injury when changing any parts, or accessories.
♦ Health hazards caused by breathing dust developed
when sawing wood, especially oak, beech and MDF.
♦ Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
Safety of others
♦ This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
♦ Unpack all parts and lay them on a flat, stable surface
♦ Remove all packing materials and shipping devices, if
Labels on tool
The following pictograms along with the date code are
shown on the tool:
Warning! To reduce the risk of injury, the user
must read the instruction manual.
Wear safety glasses or goggles.
Wear ear protection.
Wear a dust mask.
Wear gloves when handling blades.
(Original instructions)
5