Quality Control Solution; Automatic Self Test - NIPRO Diagnostics TRUE METRIX Owner's Booklet

Quality Control Testing
To assure you are getting accurate and reliable results,
TRUE METRIX offers two kinds of quality Control
Tests. These tests let you know
that your System is working properly
and your testing technique is good.
Automatic Self-Test
An Automatic Self-Test is performed
by the meter each time a test strip is
inserted correctly into the Test Port.
Insert a test strip into the Test Port.
The meter is working properly if:
~ the full Display appears, then
~ the time appears in the upper
part of the Display, and then,
~ the Drop Symbol begins to blink.
If an error message appears in the Display,
the meter will not perform a test.
See Troubleshooting or call 1-800-803-6025.
Caution!
If any segments are missing in the Display
when meter is first turned on, do not use the
meter for testing. Call 1-800-803-6025.
15
Contact
Blocks
Face Up
Full Display
Drop Symbol
Error Message