Cycle Control; Ready Strobe Mode - First Light T-MAX User Manual

CYCLE CONTROL

The Cycle Control
brightness level of the primary white LED while in
Constant-On Mode. Press and release the Cycle
Control button when the primary LED is illuminated
to select one of three brightness levels. The light will
default to the last used Constant-On brightness setting.

READY STROBE MODE

With light in Ready Mode, but not on, activate
strobe by pressing the Cycle Control
The strobe will activate as long as the Cycle
Control button is pressed.
With the light in Constant-On Mode, activate the
strobe by pressing and holding the Momentary
Control button with the base of the thumb.
Then press the Cycle Control
front portion of the same thumb.
The Ready Strobe function can be activated
ONLY as a momentary function and cannot be
locked on.
8
button is used to adjust the
button with the
button.
MOMENTARY
NOTE: Upon exiting Ready Strobe Mode,
the light will default to the last used function.
CONTROL
CYCLE
CONTROL
CYCLE
CONTROL