Philips Baby Monitor SCD463 User Manual page 13

Problem
Interference or poor
reception.
Pick-up from another
baby monitor.
LINK light (B-2)
flashing red / LINK
alarm (B-6) beeps.
Possible cause
Mobile or cordless phone(s)
too close to baby monitor.
Interference from other
baby monitors in the
neighbourhood.
Battery power running low.
Transmitted signal is out of
range; e.g. there are too many
walls and/or ceilings between
baby unit and parent unit.
Parent unit located too close to
a window and picking up
interfering signals from other
appliances.
Both systems are operating
on the same frequency.
Units are out of range.
Interference from another
baby monitor.
Interference from another
FM source.
Troubleshooting
Solution
Move phone(s) away from
baby monitor.
Switch both units to another
channel using the channel
selection switch (A-8, B-7).
Replace batteries.
Move parent unit closer
to baby unit.
Move parent unit away
from window.
Switch channels (A-8, B-7).
Make sure both units are set
to the same position.
Move units closer together.
Switch to a different channel
(A-8, B-7).
Remove other FM source.
EN
13