Enlarging Or Reducing Images - Toshiba e-studio2000ac Copying Manual

Enlarging or Reducing Images

0.
You can change the reproduction ratio of copied images in the following procedures:
Automatic Magnification Selection (AMS):
You need to specify the copy paper size in advance. Then this equipment will detect the original size and
automatically select the optimal reproduction ratio for the copy paper size.
Specifying both original size and copy paper size separately:
You need to specify both the original size and the copy paper size separately in advance. According to the sizes you
specified, the optimal reproduction ratio is selected automatically. This feature is used when Automatic Magnification
Selection is not available, such as when copying OHP film originals.
Specifying reproduction ratio manually:
You can select the desired reproduction ratio by pressing [ZOOM] or one-touch zoom buttons on the touch panel.
Copying photo originals in the optimal reproduction ratio for copy paper size (PHOTO ZOOM):
You can copy photo originals in the reproduction ratio best suited to the copy paper size.
Reducing images to scan the entire original, including the edges (full image):
You can copy an entire original including images and notes on the edge. Copied originals are reduced by 1 to 5% so
that the entire part fits into the paper size.
The available range of reproduction ratio differs depending on whether the original is placed on the original glass or
the ADF.
 Original glass: 25 to 400%
 ADF: 25 to 200%

Enlarging or Reducing Images 43