Related Manuals for MiiCraft 100
Summary of Contents for MiiCraft 100
- Page 1 3D production system ► Make a better world MiiCraft125 series 125/100/80/50/100X 3D Printer User Manual for Hardware Version 1.5...
-
Page 2: Table Of Contents
3D production system ► Make a better world Content 1 Product Information---------------------------------------------------------------------------------------------------------------3 1.1 Instructions for Use-------------------------------------------------------------------------------------------------------3 1.2 Regulatory Statements---------------------------------------------------------------------------------------------------3 1.3 Safety Precautions--------------------------------------------------------------------------------------------------------4 1.4 General Information------------------------------------------------------------------------------------------------------5 1.5 Package Contents----------------------------------------------------------------------------------------------------------5 1.6 Product Overview---------------------------------------------------------------------------------------------------------6 2 Set up your 3D printer -Hardware----------------------------------------------------------------------------------------------7 2.1 Unpack-----------------------------------------------------------------------------------------------------------------------7 2.2 Connect Computer--------------------------------------------------------------------------------------------------------7 2.3 Power Button Control----------------------------------------------------------------------------------------------------8 2.4 Install Picker----------------------------------------------------------------------------------------------------------------9... -
Page 3: Product Information
3D production system ► Make a better world 1 Product Information 1.1 Instructions for Use Please read through the following Instructions before you start using your printer. (1) Ensure that the glass under tank is positioned flat at the corners point, for not damaging printer while printing. -
Page 4: Safety Precautions
(3) This printer needs a grounded, 1-phase electrical power source. (4) Make sure power and communication cables are well managed to prevent from tripping. (5) Only use resins supplied by MiiCraft manufacturer. Use of other unauthorized resins may cause printing failure. -
Page 5: General Information
‧Liability: In case you do not follow the operating manual we cannot be held responsible for damages of the machine or injuries on the operator. ‧Repair can only be carried out by authorized person of MiiCraft. 1.4 Package Contents There is a printer and an accessory box inside the package. As soon as you receive our products, please verify its content and check if there's any exterior damage due to transportation. -
Page 6: Product Overview
3D production system ► Make a better world 1.6 Product Overview Power Button Front Panel Handle Printer Door Picker Resin Tank Storage Area USB Port Network Port Power Jack Front view... -
Page 7: Set Up Your 3D Printer -Hardware
3D production system ► Make a better world 2 Setting up your 3D printer - Hardware 2.1 Unpack (1) Remove the top (2) Remove the EPE (3) Remove the side (4) Remove the inner cardboard surround the inner box cardboard Printer net weighs 37.5kg. -
Page 8: Power Button Control
Firmware version Press Press Select filez Hold 2 sec. Hold 2 sec. Insert USB to printer Press Press Upgrade Firmware ※ Download the latest firmware from http://www.miicraft.com/support/ to your USB first. Save as .ZIP file, and select it for upgrade... -
Page 9: Install Picker
3D production system ► Make a better world 2.4 Install Picker Carry both end of picker and install it Put down the handle to lock the Picker onto the machine Handle ※ Remove the Picker: Lift the handle→Carry both end of picker→Remove the Picker 2.5 Fill resin tank Unlock the Resin tank from four corners Pick up the resin tank... -
Page 10: Operate Your 3D Printer -Software
3D production system ► Make a better world 3 Operate your 3D printer –Software Please refer to MiiUtility User Manual, all-in-one software for MiiCraft printers. 4 After Print 4.1 Remove Model Lift the handle→Remove the Picker and printed model→Use air gun and ethanol to clean the printed model →Post curing (Additional post curing unit is required)→Carefully remove the printed model from the... -
Page 11: Appendix 1. Specifications
3D production system ► Make a better world Appendix 1. Specifications... -
Page 12: Appendix 2. Resin Curing Time
3D production system ► Make a better world Appendix 2. Resin curing time... -
Page 13: Appendix 3. Printing Parameter
3D production system ► Make a better world Appendix 3. Printing Parameter...
Need help?
Do you have a question about the 100 and is the answer not in the manual?
Questions and answers