Table of Contents
Advertisement
A
The Standby Timer (Viewfinder Photography)
The viewfinder display will turn off if no operations are
performed for about eight seconds, reducing the drain on
the battery. Press the shutter-release button halfway to
reactivate the display. The length of time before the
standby timer expires automatically can be selected using
Custom Setting c2 (Auto off timers; 0 240).
Exposure meters off
A
The Standby Timer (Live View)
The monitor will turn off if no operations are performed for about ten
minutes. The length of time before the monitor turns off automatically
can be selected using Custom Setting c2 (Auto off timers; 0 240).
A
Live View Zoom Preview
To magnify the view in the monitor up to about 8.3× for precise focus,
press the X button. While the view through the lens is zoomed in, a
navigation window will appear in a gray frame at the bottom right
corner of the display. Use the multi selector to scroll to areas of the
frame not visible in the monitor, or press W (Q) to zoom out.
X button
Basic Photography and Playback
Exposure meters on
Navigation window
53
Advertisement
Table of Contents
