Table of Contents
Advertisement
2
Press J when the dialog at right is
displayed.
If you do not wish to use a smart
device to configure the camera, press
G (0 40).
3
Pair the camera and the smart
device.
• Android devices with NFC support: After
checking that NFC is enabled on the
smart device, touch the camera
H (N-Mark) to the NFC antenna on
the smart device to launch the
SnapBridge app. If the SnapBridge
download site is displayed,
download and install the app before repeating the above
steps.
• iOS devices and Android devices without
NFC support: Press the camera J
button. The camera will wait for a
connection; launch the SnapBridge
app on the smart device and follow
the on-screen instructions to tap the
name of the camera you want to pair
with.
34 First Steps
Connect to Camera
Camera name
D5600
Advertisement
Table of Contents
