Table of Contents
Advertisement
When an Eye-Fi card is inserted, its status
is indicated by an icon in the information
display:
• d: Eye-Fi upload disabled.
• e: Eye-Fi upload enabled but no
pictures available for upload.
• f (static): Eye-Fi upload enabled;
waiting to begin upload.
• f (animated): Eye-Fi upload enabled; uploading data.
• g: Error — camera can not control Eye-Fi card. If a flashing (
appears in the viewfinder, check that the Eye-Fi card firmware
is up-to-date; if the error persists after the card firmware has
been updated, insert a different card or format the card in the
camera after copying any pictures it contains to a computer or
other storage device. If the ( indicator is not flashing,
pictures can be taken normally but you may be unable to
change Eye-Fi settings.
A
Supported Eye-Fi Cards
Some cards may not be available in some countries or regions; consult
the manufacturer for more information. Eye-Fi cards are for use only in
the country of purchase. Be sure the Eye-Fi card firmware has been
updated to the latest version.
B The Setup Menu: Camera Setup
275
Advertisement
Table of Contents
