Epson EPL-5800 Service Manual page 90

EPSON EPL-5800
6.1 Maintenance
This section gives information neccesary for maintaining the printer in its optimum
condition. Preriodical user maintenance and service maintenance are necesssary in order to
maintain the high printing quality.
6.1.1 User Maintenance on Main Unit
Table 6-1. User Maintenance on Main Unit
Maintenance Item Timing
Clean paper-feed When a paper feeding
roller problem occurs.
Maintenance
Method
1. Open the top cover and remove
Developer Cartridge and
photoconductor unit.
2. Open the paper-feed roller cover and
wipe the roller with a damp, soft cloth.
Do not use a solvent such as alcohol.
6.1.2 Maintenance of Consumables
A user is responsible for the maintenance of all consumables.
Table 6-2. Maintenance of Consumables
Maintenance Item
Developer cartridge Replace after
printing approx.
6,000 sheets
Photoconductor unit Replace after
printing approx.
20,000 sheets
Maintenance
Timing Method
Follow the procedure below to replace the
Developer cartridge.
1. Press the open button and open the top
cover.
2. Grasp the handles on the Developer
cartridge and pull off the cartridge from the
unit.
3. Hold the new Developer cartridge and
shake it from side to side.
4. Fully insert the new Developer cartridge
into the printer.
5. Close the top cover.
Follow the procedure below to replace the
photoconductor unit.
1. Press the open button and open the top
cover.
2. Grasp the handles on the Developer
cartridge and pull off the cartridge from the
unit.
3. Pull off the photoconductor unit.
4. Fully insert the new Photoconductor unit
into the printer.
5. Insert the Developer Cartridge which
removed at (2) above.
6. Close the top cover.
Revision B
92