Installing Display Hinge Cover; Display Hinges; Removing Display Hinge - Dell Latitude 5280 Owner's Manual

Installing display hinge cover

1 Place the display hinge cover on the display hinge.
2 Tighten the M2.5*3 screw to secure the display hinge cover to the display hinge.
3 Repeat step a and step b to install the other display hinge cover.
4 Install the:
a display bezel
b display assembly
c WLAN card
d battery
e base cover
5 Follow the procedure in

Display hinges

Removing display hinge

The following procedure is applicable only if your computer is a non-touch computer.
1 Follow the procedure in
2 Remove the:
a base cover
b battery
c WLAN card
d display assembly
e display bezel
f display hinge cover
3 To remove the display hinge:
a Remove the M2.5*3 screws that secure the display hinge to the display assembly [1].
b Lift the display hinge away from the display assembly [2].
c Repeat step a and step b to remove the other display hinge.
42 Removing and installing components
After working inside your computer.
Before working inside your computer.