Removing The Display-Hinge Cover; Installing The Display-Hinge Cover; Removing The Heatsink - Dell Latitude E7240 Owner's Manual

f. SD card
4. Follow the procedures in After Working Inside Your Computer.

Removing the Display-Hinge Cover

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove battery.
3. Remove the screws that secure the display-hinge cover to the computer. Lift the display-hinge
cover.

Installing the Display-Hinge Cover

1. Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the
computer.
2. Install battery.
3. Follow the procedures in After Working Inside Your Computer.

Removing the Heatsink

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. SD card
b. battery
c. base cover
d. mSATA
e. keyboard trim
f. keyboard
g. palmrest
h. display-hinge cover
i. display assembly
3. Remove the screws that secure the heatsink to the computer.
4. Perform the following steps as shown in the illustration:
a. Lift the heatsink from the computer [1].
b. Remove the heatsink from the computer [2].
24