Table of Contents
Advertisement
SMS stands for Short Message Service. To benefit from this service, you must subscribe to Caller Line
Identification Service (CLI) together with SMS service from your network provider. SMS messages can be
exchanged with a phone (mobile or compatible fixed lines), provided the receiver has also subscribed to CLI
and SMS services.
The factory settings on your ID937 correspond to the main national operator. If you wish to send or receive
SMS messages through another service provider, you must set the corresponding numbers (see page 33).
You can create up to 10 SMS boxes
Your ID937 can store up to 50 SMS messages (40 SMS in the Inbox and 10 SMS in the Draft box) shared by
all the SMS boxes and the maximum length of each message is 160 characters.
In order to send and receive SMS messages, there must be at least one SMS Box.
is created by default (only for UK). For more information, please refer to "SMS Box (only for UK)" on page 32.
Write and send new SMS
m
1.
Press
MENU
, press
:
2.
Scroll
to the desired SMS Box
Otherwise, you may press
Box.
3.
Enter the PIN (if required) and press
Key
Operation
u
Press to move cursor left by 1 position.
Press and hold to jump to the 1st character/digit.
d
Press to move cursor right by 1 position.
Press and hold to jump to the last character/digit.
>
Press to erase the previous character/digit.
CLEAR
Press to return to the previous menu if there are no characters/digits on the input
screen.
Long press to delete all characters/digits.
#
Long press to switch between upper and lower case.
SMS
SMS
Write a SMS
Inbox
Draft box
SMS Settings
(Box 0
to
Box
9) and protect each box with a password (only for UK).
m
to enter SMS, press
SELECT
(Box 0
to
Box
9) and press
m
SELECT
to go the next screen if you do not need to enter a specific SMS
m
.
OK
Box 9
with empty password
m
SELECT
again to enter
m
(only for UK).
SELECT
EN
Write a
SMS.
27
Advertisement
Table of Contents
