6
SMS
SMS stands for Short Message Service. To benefit
from this service, you must subscribe to Caller
Line Identification Service (CLI) together with
SMS service from your network provider. SMS
messages can be exchanged with a phone (mobile
or compatible fixed lines), provided the receiver
has also subscribed to CLI and SMS services.
The factory settings on your handset correspond
to the main national operator. If you wish to send
or receive SMS messages through another service
provider, you must set the corresponding
numbers (see “To set outgoing number” on
page 30).
You can create up to 10 SMS boxes (
to
Box 0
Box
) and protect each box with a password (only for
9
UK).
Your handset can store up to 50 SMS messages
(40 SMS in the Inbox and 10 SMS in the Draft box)
shared by all the SMS boxes and the maximum
length of each message is 160 characters.
In order to send and receive SMS messages, there
must be at least one SMS Box.
with empty
Box 9
password is created by default (only for UK). For
more information, please refer to “Create a new
SMS Box (only for UK)” on page 29.
6.1 Write and send new SMS
Note
When composing your SMS, if there are no key
presses for 30 seconds, the handset will return to
idle mode. The edited message will be
automatically saved in the SMS editor buffer.
m
1
Press
MENU in idle mode, press
m
SELECT to enter
, press
SMS
m
SELECT again to enter
.
Write a SMS
:
2
Scroll
to the desired SMS Box (
to
Box 0
m
) and press
SELECT (only for UK).
Box 9
m
Otherwise, you may press
SELECT to go
the next screen if you do not need to enter a
specific SMS Box.
m
.
3
Enter the PIN (if required) and press
OK