Renault Sandero Owner's Manual page 85

REAR BENCH SEAT (functions)
1
2
3
To fold down the seatback
Remove the rear headrests (if fitted).
Lower handle 1.
Lower seatbacks 2 and 3.
When moving the rear
bench seat, make sure the
anchorage points are clean
(they should be free from
grit, cloths, toys etc.).
To reposition the seatback
Raise the seatbacks.
Check the seatbacks are correctly
locked in position.
Check that the rear seat
belts are positioned and
operating correctly each
time the rear bench seat is
moved.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
– When returning the
seatback to its normal
position, make sure that
it is properly locked at the
top.
– If seat covers are fitted, make
sure these do not prevent the
seatback latch from locking in.
– When moving the bench seat,
ensure the seat belt unit buckles
do not cross over and ensure they
are correctly repositioned before
folding down the seat base.
Once the bench seat has been re-
turned to its normal position, check
that the seat belts are correctly po-
sitioned. The seat belts must be on
the seatback.
3.15